Failed
gprs:trx-b200+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28996): Process ended prematurely: osmo-stp_10.42.42.5(pid=28996) [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28996)]
Standard Output
---------------------------------------------- trial-2387 gprs:trx-b200+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 08:57:23.160072 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.171517 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:57:23.330179 tst iperf3.py: using LAC 32861 08:57:23.448697 tst iperf3.py: using RAC 221 08:57:23.566702 tst iperf3.py: using CellId 32861 08:57:23.684550 tst iperf3.py: using BVCI 32862 08:57:23.707318 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.718341 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.728881 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.739550 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.750815 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.761902 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.773058 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.784073 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:57:23.795258 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:57:24.071971 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:57:24.196861 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:57:24.504243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28988): Launched 08:57:24.759995 run iperf3-srv_10.42.42.10(pid=28989): Launched 08:57:24.942118 tst iperf3.py:8: start network... 08:57:25.066791 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:57:25.532476 run create_hlr_db(pid=28990): Launched 08:57:25.703544 bus /gobi_6: Setting Powered False 08:57:26.724744 run create_hlr_db(pid=28990): Terminated: ok {rc=0} 08:57:27.118070 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28992): Launched 08:57:27.413523 run osmo-hlr_10.42.42.2(pid=28993): Launched 08:57:27.526810 run osmo-stp_10.42.42.5: Starting osmo-stp 08:57:28.052133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28995): Launched 08:57:28.349550 run osmo-stp_10.42.42.5(pid=28996): Launched 08:57:28.458447 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:57:28.973496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28998): Launched 08:57:29.079445 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:57:29.339642 run patchelf(pid=28999): Launched 08:57:29.513581 run osmo-stp_10.42.42.5(pid=28996): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28996)] 08:57:29.640629 run osmo-stp_10.42.42.5(pid=28996): stdout: | (launched: 2022-12-13_08:57:28.203508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:29.768038 run osmo-stp_10.42.42.5(pid=28996): stderr: | �[0;m�[38;5;43m20221213085728374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085728375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085728375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085728375 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:29.891801 run osmo-stp_10.42.42.5(pid=28996): stdout: | (launched: 2022-12-13_08:57:28.203508) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:57:30.013977 run osmo-stp_10.42.42.5(pid=28996): stderr: | �[0;m�[38;5;43m20221213085728374 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213085728375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213085728375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213085728375 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213085728376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:57:30.156064 run patchelf(pid=28999): Terminating (SIGINT) 08:57:30.323211 run patchelf(pid=28999): Terminated: ok {rc=0} 08:57:30.353998 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28996): Process ended prematurely: osmo-stp_10.42.42.5(pid=28996) [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28996)] [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8] 08:57:30.363179 tst iperf3.py:8: Test FAILED (7.2 sec) 08:57:30.423548 run osmo-hlr_10.42.42.2(pid=28993): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28993)] 08:57:30.472882 run osmo-hlr_10.42.42.2(pid=28993): stdout: | (launched: 2022-12-13_08:57:27.268145) 08:57:30.522995 run osmo-hlr_10.42.42.2(pid=28993): stderr: | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213085727444 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213085727456 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:trx-b200+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213085727464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213085727464 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213085727465 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:57:30.565636 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28988): Terminating (SIGTERM) 08:57:30.605575 run iperf3-srv_10.42.42.10(pid=28989): Terminating (SIGTERM) 08:57:30.645755 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28992): Terminating (SIGTERM) 08:57:30.685828 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28995): Terminating (SIGTERM) 08:57:30.725849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28998): Terminating (SIGTERM) 08:57:30.735064 --- ParallelTerminationStrategy: PID 28988 died... 08:57:30.788923 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28988): Terminated: ok {rc=0} 08:57:30.798588 --- ParallelTerminationStrategy: PID 28989 died... 08:57:30.852093 run iperf3-srv_10.42.42.10(pid=28989): Terminated {rc=256} 08:57:30.861745 --- ParallelTerminationStrategy: PID 28992 died... 08:57:30.918228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28992): Terminated: ok {rc=0} 08:57:30.928543 --- ParallelTerminationStrategy: PID 28995 died... 08:57:30.987624 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28995): Terminated: ok {rc=0} 08:57:31.002889 --- ParallelTerminationStrategy: PID 28998 died... 08:57:31.057270 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28998): Terminated: ok {rc=0} 08:57:31.151367 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28996): Process ended prematurely: osmo-stp_10.42.42.5(pid=28996) [trial-2387↪gprs:trx-b200+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28996)]