Failed
gprs:sysmo+mod-bts0-egprs.iperf3.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)]
Standard Output
---------------------------------------------- trial-2387 gprs:sysmo+mod-bts0-egprs iperf3.py ---------------------------------------------- 08:40:01.997932 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.010734 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:40:02.173605 tst iperf3.py: using LAC 32768 08:40:02.310060 tst iperf3.py: using RAC 128 08:40:02.439827 tst iperf3.py: using CellId 32768 08:40:02.565290 tst iperf3.py: using BVCI 32769 08:40:02.589555 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.600736 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.611630 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.622521 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.633581 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.644423 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.655594 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.666603 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:40:02.677663 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:40:02.967651 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 08:40:03.098668 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:40:03.426970 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Launched 08:40:03.701117 run iperf3-srv_10.42.42.10(pid=26957): Launched 08:40:03.893559 tst iperf3.py:8: start network... 08:40:04.024772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:40:04.523593 run create_hlr_db(pid=26958): Launched 08:40:04.704318 bus /gobi_6: Setting Powered False 08:40:05.726511 run create_hlr_db(pid=26958): Terminated: ok {rc=0} 08:40:06.146342 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Launched 08:40:06.463575 run osmo-hlr_10.42.42.2(pid=26961): Launched 08:40:06.584678 run osmo-stp_10.42.42.5: Starting osmo-stp 08:40:07.138275 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Launched 08:40:07.454771 run osmo-stp_10.42.42.5(pid=26964): Launched 08:40:07.579434 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:40:08.132494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Launched 08:40:08.244774 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:40:08.521294 run patchelf(pid=26967): Launched 08:40:08.705139 run osmo-stp_10.42.42.5(pid=26964): ERR: Terminated: ERROR {rc=1} [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)] 08:40:08.839677 run osmo-stp_10.42.42.5(pid=26964): stdout: | (launched: 2022-12-13_08:40:07.297835) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:08.974575 run osmo-stp_10.42.42.5(pid=26964): stderr: | �[0;m�[38;5;43m20221213084007474 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084007475 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:09.104609 run osmo-stp_10.42.42.5(pid=26964): stdout: | (launched: 2022-12-13_08:40:07.297835) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:40:09.233089 run osmo-stp_10.42.42.5(pid=26964): stderr: | �[0;m�[38;5;43m20221213084007474 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213084007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213084007475 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213084007475 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213084007476 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:40:09.382951 run patchelf(pid=26967): Terminating (SIGINT) 08:40:09.559268 run patchelf(pid=26967): Terminated: ok {rc=0} 08:40:09.591406 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)] [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8] 08:40:09.600638 tst iperf3.py:8: Test FAILED (7.6 sec) 08:40:09.661847 run osmo-hlr_10.42.42.2(pid=26961): ERR: Terminated: ERROR {rc=237} [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26961)] 08:40:09.711483 run osmo-hlr_10.42.42.2(pid=26961): stdout: | (launched: 2022-12-13_08:40:06.306253) 08:40:09.761714 run osmo-hlr_10.42.42.2(pid=26961): stderr: | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213084006489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213084006500 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2387/run.2022-12-13_08-32-52/gprs:sysmo+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213084006508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213084006508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213084006508 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:40:09.804745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Terminating (SIGTERM) 08:40:09.845325 run iperf3-srv_10.42.42.10(pid=26957): Terminating (SIGTERM) 08:40:09.885901 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Terminating (SIGTERM) 08:40:09.926334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Terminating (SIGTERM) 08:40:09.966846 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Terminating (SIGTERM) 08:40:09.976278 --- ParallelTerminationStrategy: PID 26956 died... 08:40:10.030917 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26956): Terminated: ok {rc=0} 08:40:10.040638 --- ParallelTerminationStrategy: PID 26957 died... 08:40:10.094798 run iperf3-srv_10.42.42.10(pid=26957): Terminated {rc=256} 08:40:10.104512 --- ParallelTerminationStrategy: PID 26960 died... 08:40:10.158787 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26960): Terminated: ok {rc=0} 08:40:10.168609 --- ParallelTerminationStrategy: PID 26963 died... 08:40:10.222750 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26963): Terminated: ok {rc=0} 08:40:10.232482 --- ParallelTerminationStrategy: PID 26966 died... 08:40:10.286621 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26966): Terminated: ok {rc=0} 08:40:10.371629 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26964): Process ended prematurely: osmo-stp_10.42.42.5(pid=26964) [trial-2387↪gprs:sysmo+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26964)]