Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13152): Process ended prematurely: osmo-stp_10.42.42.5(pid=13152) [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13152)]
Standard Output
---------------------------------------------- trial-2388 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 11:16:45.212926 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.224278 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:16:45.358707 tst ping.py: using LAC 33570 11:16:45.473081 tst ping.py: using RAC 165 11:16:45.588378 tst ping.py: using CellId 33570 11:16:45.704368 tst ping.py: using BVCI 33571 11:16:45.726696 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.737623 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.748226 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.758827 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.769339 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.779863 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.790678 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:16:45.801306 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:16:46.093615 tst ping.py:19: start network... 11:16:46.229106 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:16:46.774755 run create_hlr_db(pid=13146): Launched 11:16:46.963442 bus /gobi_6: Setting Powered False 11:16:47.981231 run create_hlr_db(pid=13146): Terminated: ok {rc=0} 11:16:48.378631 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13148): Launched 11:16:48.671960 run osmo-hlr_10.42.42.2(pid=13149): Launched 11:16:48.786967 run osmo-stp_10.42.42.5: Starting osmo-stp 11:16:49.306533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13151): Launched 11:16:49.599320 run osmo-stp_10.42.42.5(pid=13152): Launched 11:16:49.718022 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:16:50.236427 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13154): Launched 11:16:50.340305 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:16:50.596135 run patchelf(pid=13155): Launched 11:16:50.767880 run osmo-stp_10.42.42.5(pid=13152): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13152)] 11:16:50.893222 run osmo-stp_10.42.42.5(pid=13152): stdout: | (launched: 2022-12-13_11:16:49.455329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:16:51.018973 run osmo-stp_10.42.42.5(pid=13152): stderr: | �[0;m�[38;5;43m20221213111649625 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111649625 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111649626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111649626 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111649626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111649627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111649627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:16:51.139762 run osmo-stp_10.42.42.5(pid=13152): stdout: | (launched: 2022-12-13_11:16:49.455329) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:16:51.259885 run osmo-stp_10.42.42.5(pid=13152): stderr: | �[0;m�[38;5;43m20221213111649625 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213111649625 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213111649626 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213111649626 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213111649626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213111649627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213111649627 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:16:51.399793 run patchelf(pid=13155): Terminating (SIGINT) 11:16:51.564689 run patchelf(pid=13155): Terminated: ok {rc=0} 11:16:51.594678 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=13152): Process ended prematurely: osmo-stp_10.42.42.5(pid=13152) [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13152)] [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 11:16:51.603192 tst ping.py:22: Test FAILED (6.4 sec) 11:16:51.662418 run osmo-hlr_10.42.42.2(pid=13149): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13149)] 11:16:51.710586 run osmo-hlr_10.42.42.2(pid=13149): stdout: | (launched: 2022-12-13_11:16:48.527044) 11:16:51.759391 run osmo-hlr_10.42.42.2(pid=13149): stderr: | �[0;m�[1;31m20221213111648704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213111648704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213111648704 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213111648705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213111648705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213111648705 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213111648717 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213111648725 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213111648725 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213111648725 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:16:51.801150 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13148): Terminating (SIGTERM) 11:16:51.840418 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13151): Terminating (SIGTERM) 11:16:51.879627 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13154): Terminating (SIGTERM) 11:16:51.889330 --- ParallelTerminationStrategy: PID 13148 died... 11:16:51.942215 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13148): Terminated: ok {rc=0} 11:16:51.951924 --- ParallelTerminationStrategy: PID 13151 died... 11:16:52.004626 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13151): Terminated: ok {rc=0} 11:16:52.014393 --- ParallelTerminationStrategy: PID 13154 died... 11:16:52.067119 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13154): Terminated: ok {rc=0} 11:16:52.155413 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13152): Process ended prematurely: osmo-stp_10.42.42.5(pid=13152) [trial-2388↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13152)]