Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7655): Process ended prematurely: osmo-stp_10.42.42.5(pid=7655) [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7655)]
Standard Output
---------------------------------------------- trial-2388 gprs:sysmo+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 10:13:38.088400 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.100925 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:13:38.255239 tst ping.py: using LAC 33236 10:13:38.379637 tst ping.py: using RAC 86 10:13:38.502598 tst ping.py: using CellId 33236 10:13:38.625955 tst ping.py: using BVCI 33237 10:13:38.649844 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.660702 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.671477 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.682216 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.693304 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.704170 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.715133 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:13:38.725839 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:13:39.010169 tst ping.py:19: start network... 10:13:39.137712 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:13:39.632347 run create_hlr_db(pid=7649): Launched 10:13:39.809400 bus /gobi_6: Setting Powered False 10:13:40.830491 run create_hlr_db(pid=7649): Terminated: ok {rc=0} 10:13:41.274838 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7651): Launched 10:13:41.608428 run osmo-hlr_10.42.42.2(pid=7652): Launched 10:13:41.729682 run osmo-stp_10.42.42.5: Starting osmo-stp 10:13:42.318520 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7654): Launched 10:13:42.652350 run osmo-stp_10.42.42.5(pid=7655): Launched 10:13:42.772513 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:13:43.348936 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7657): Launched 10:13:43.467319 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:13:43.756418 run patchelf(pid=7658): Launched 10:13:43.949183 run osmo-stp_10.42.42.5(pid=7655): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7655)] 10:13:44.090028 run osmo-stp_10.42.42.5(pid=7655): stdout: | (launched: 2022-12-13_10:13:42.486755) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:44.231989 run osmo-stp_10.42.42.5(pid=7655): stderr: | �[0;m�[38;5;43m20221213101342678 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101342678 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101342679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101342679 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:44.369029 run osmo-stp_10.42.42.5(pid=7655): stdout: | (launched: 2022-12-13_10:13:42.486755) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:13:44.504599 run osmo-stp_10.42.42.5(pid=7655): stderr: | �[0;m�[38;5;43m20221213101342678 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213101342678 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213101342679 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213101342679 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213101342680 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:13:44.662039 run patchelf(pid=7658): Terminating (SIGINT) 10:13:44.847165 run patchelf(pid=7658): Terminated: ok {rc=0} 10:13:44.881115 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7655): Process ended prematurely: osmo-stp_10.42.42.5(pid=7655) [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7655)] [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22] 10:13:44.890794 tst ping.py:22: Test FAILED (6.8 sec) 10:13:44.955285 run osmo-hlr_10.42.42.2(pid=7652): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7652)] 10:13:45.007702 run osmo-hlr_10.42.42.2(pid=7652): stdout: | (launched: 2022-12-13_10:13:41.442846) 10:13:45.060485 run osmo-hlr_10.42.42.2(pid=7652): stderr: | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213101341638 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213101341651 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:sysmo+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213101341660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213101341660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213101341660 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:13:45.106204 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7651): Terminating (SIGTERM) 10:13:45.149145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7654): Terminating (SIGTERM) 10:13:45.191998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7657): Terminating (SIGTERM) 10:13:45.201840 --- ParallelTerminationStrategy: PID 7651 died... 10:13:45.259322 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7651): Terminated: ok {rc=0} 10:13:45.269963 --- ParallelTerminationStrategy: PID 7654 died... 10:13:45.326756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7654): Terminated: ok {rc=0} 10:13:45.336827 --- ParallelTerminationStrategy: PID 7657 died... 10:13:45.393772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7657): Terminated: ok {rc=0} 10:13:45.481507 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7655): Process ended prematurely: osmo-stp_10.42.42.5(pid=7655) [trial-2388↪gprs:sysmo+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7655)]