Failed
gprs:trx-b200+mod-bts0-dynts-ipa.ping.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=9083): Process ended prematurely: osmo-stp_10.42.42.5(pid=9083) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9083)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-b200+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 10:30:25.174974 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.186824 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:30:25.344779 tst ping.py: using LAC 33324 10:30:25.468240 tst ping.py: using RAC 174 10:30:25.590828 tst ping.py: using CellId 33324 10:30:25.712427 tst ping.py: using BVCI 33325 10:30:25.735839 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.746925 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.757732 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.768466 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.779174 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.790408 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.801826 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:30:25.812561 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:30:26.093859 tst ping.py:19: start network... 10:30:26.222433 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:30:26.715864 run create_hlr_db(pid=9077): Launched 10:30:26.892794 bus /gobi_6: Setting Powered False 10:30:27.913510 run create_hlr_db(pid=9077): Terminated: ok {rc=0} 10:30:28.355838 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9079): Launched 10:30:28.688500 run osmo-hlr_10.42.42.2(pid=9080): Launched 10:30:28.810126 run osmo-stp_10.42.42.5: Starting osmo-stp 10:30:29.389237 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9082): Launched 10:30:29.720903 run osmo-stp_10.42.42.5(pid=9083): Launched 10:30:29.840365 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:30:30.418413 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9085): Launched 10:30:30.535693 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:30:30.824386 run patchelf(pid=9086): Launched 10:30:31.035009 run osmo-stp_10.42.42.5(pid=9083): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9083)] 10:30:31.171612 run osmo-stp_10.42.42.5(pid=9083): stdout: | (launched: 2022-12-13_10:30:29.556312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:31.308440 run osmo-stp_10.42.42.5(pid=9083): stderr: | �[0;m�[38;5;43m20221213103029747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103029747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103029748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103029748 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:31.439256 run osmo-stp_10.42.42.5(pid=9083): stdout: | (launched: 2022-12-13_10:30:29.556312) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:30:31.570740 run osmo-stp_10.42.42.5(pid=9083): stderr: | �[0;m�[38;5;43m20221213103029747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213103029747 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213103029748 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213103029748 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213103029749 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:30:31.723027 run patchelf(pid=9086): Terminating (SIGINT) 10:30:31.902899 run patchelf(pid=9086): Terminated: ok {rc=0} 10:30:31.935564 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=9083): Process ended prematurely: osmo-stp_10.42.42.5(pid=9083) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9083)] [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22] 10:30:31.945016 tst ping.py:22: Test FAILED (6.8 sec) 10:30:32.007821 run osmo-hlr_10.42.42.2(pid=9080): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9080)] 10:30:32.061199 run osmo-hlr_10.42.42.2(pid=9080): stdout: | (launched: 2022-12-13_10:30:28.523138) 10:30:32.114364 run osmo-hlr_10.42.42.2(pid=9080): stderr: | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213103028719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213103028731 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213103028740 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213103028740 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213103028740 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:30:32.158940 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9079): Terminating (SIGTERM) 10:30:32.203576 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9082): Terminating (SIGTERM) 10:30:32.244999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9085): Terminating (SIGTERM) 10:30:32.254522 --- ParallelTerminationStrategy: PID 9079 died... 10:30:32.309633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9079): Terminated: ok {rc=0} 10:30:32.319578 --- ParallelTerminationStrategy: PID 9082 died... 10:30:32.373912 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9082): Terminated: ok {rc=0} 10:30:32.383797 --- ParallelTerminationStrategy: PID 9085 died... 10:30:32.438493 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9085): Terminated: ok {rc=0} 10:30:32.524300 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9083): Process ended prematurely: osmo-stp_10.42.42.5(pid=9083) [trial-2388↪gprs:trx-b200+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9083)]