Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)

Failing for the past 203 builds (Since #2186 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=8952): Process ended prematurely: osmo-stp_10.42.42.5(pid=8952) [trial-2388↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8952)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-b200 ping_idle_ping.py
----------------------------------------------
10:28:31.018743 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.031420 tst                    gprs:trx-b200: Using 1 x bts (candidates: 1)
10:28:31.185615 tst                ping_idle_ping.py: using LAC 33315
10:28:31.329070 tst                ping_idle_ping.py: using RAC 165
10:28:31.484411 tst                ping_idle_ping.py: using CellId 33315
10:28:31.614398 tst                ping_idle_ping.py: using BVCI 33316
10:28:31.639548 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.651102 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.662209 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.673702 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.685442 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.696423 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.708024 tst                    gprs:trx-b200: Using 1 x ip_address (candidates: 9)
10:28:31.719114 tst                    gprs:trx-b200: Using 1 x modem (candidates: 4)
10:28:32.038053 tst             ping_idle_ping.py:24: start network...
10:28:32.179734 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:28:32.706993 run          create_hlr_db(pid=8946): Launched
10:28:32.898019 bus                          /gobi_6: Setting Powered False
10:28:33.918796 run          create_hlr_db(pid=8946): Terminated: ok {rc=0}
10:28:34.333175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8948): Launched
10:28:34.643141 run    osmo-hlr_10.42.42.2(pid=8949): Launched
10:28:34.755864 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:28:35.289895 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8951): Launched
10:28:35.598571 run    osmo-stp_10.42.42.5(pid=8952): Launched
10:28:35.709665 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:28:36.246720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8954): Launched
10:28:36.355509 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:28:36.626065 run               patchelf(pid=8955): Launched
10:28:36.805776 run    osmo-stp_10.42.42.5(pid=8952): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8952)]
10:28:36.937206 run    osmo-stp_10.42.42.5(pid=8952): stdout: 
| (launched: 2022-12-13_10:28:35.445481)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:28:37.068426 run    osmo-stp_10.42.42.5(pid=8952): stderr: 
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213102835618 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:28:37.195109 run    osmo-stp_10.42.42.5(pid=8952): stdout: 
| (launched: 2022-12-13_10:28:35.445481)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:28:37.321737 run    osmo-stp_10.42.42.5(pid=8952): stderr: 
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213102835617 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213102835618 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213102835618 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:28:37.468289 run               patchelf(pid=8955): Terminating (SIGINT)
10:28:37.640851 run               patchelf(pid=8955): Terminated: ok {rc=0}
10:28:37.672194 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8952): Process ended prematurely: osmo-stp_10.42.42.5(pid=8952) [trial-2388↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8952)]  [trial-2388↪gprs:trx-b200↪ping_idle_ping.py:27]
10:28:37.680886 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
10:28:37.740819 run    osmo-hlr_10.42.42.2(pid=8949): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8949)]
10:28:37.789811 run    osmo-hlr_10.42.42.2(pid=8949): stdout: 
| (launched: 2022-12-13_10:28:34.488507) 
10:28:37.839499 run    osmo-hlr_10.42.42.2(pid=8949): stderr: 
| �[0;m�[1;31m20221213102834664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213102834665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213102834665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213102834665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213102834665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213102834665 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213102834676 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213102834685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213102834685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213102834685 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:28:37.881801 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8948): Terminating (SIGTERM)
10:28:37.921726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8951): Terminating (SIGTERM)
10:28:37.961947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8954): Terminating (SIGTERM)
10:28:37.971252 ---      ParallelTerminationStrategy: PID 8948 died...
10:28:38.024545 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8948): Terminated: ok {rc=0}
10:28:38.034267 ---      ParallelTerminationStrategy: PID 8951 died...
10:28:38.087474 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8951): Terminated: ok {rc=0}
10:28:38.097161 ---      ParallelTerminationStrategy: PID 8954 died...
10:28:38.150265 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8954): Terminated: ok {rc=0}
10:28:38.239375 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8952): Process ended prematurely: osmo-stp_10.42.42.5(pid=8952) [trial-2388↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8952)]