Failed
gprs:trx-lms+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=11465): Process ended prematurely: osmo-stp_10.42.42.5(pid=11465) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11465)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 10:56:38.131953 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.143956 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:56:38.306279 tst ping.py: using LAC 33462 10:56:38.421967 tst ping.py: using RAC 57 10:56:38.537176 tst ping.py: using CellId 33462 10:56:38.654579 tst ping.py: using BVCI 33463 10:56:38.677543 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.688340 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.699009 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.709567 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.720038 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.730653 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.741327 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:56:38.751813 tst gprs:trx-lms+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:56:39.041693 tst ping.py:19: start network... 10:56:39.174435 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:56:39.676498 run create_hlr_db(pid=11459): Launched 10:56:39.861412 bus /gobi_6: Setting Powered False 10:56:40.882191 run create_hlr_db(pid=11459): Terminated: ok {rc=0} 10:56:41.291670 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11461): Launched 10:56:41.612132 run osmo-hlr_10.42.42.2(pid=11462): Launched 10:56:41.730861 run osmo-stp_10.42.42.5: Starting osmo-stp 10:56:42.289242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11464): Launched 10:56:42.609823 run osmo-stp_10.42.42.5(pid=11465): Launched 10:56:42.725786 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:56:43.281937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11467): Launched 10:56:43.396280 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:56:43.675189 run patchelf(pid=11468): Launched 10:56:43.861883 run osmo-stp_10.42.42.5(pid=11465): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11465)] 10:56:43.998117 run osmo-stp_10.42.42.5(pid=11465): stdout: | (launched: 2022-12-13_10:56:42.451608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:56:44.134762 run osmo-stp_10.42.42.5(pid=11465): stderr: | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105642647 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:56:44.266594 run osmo-stp_10.42.42.5(pid=11465): stdout: | (launched: 2022-12-13_10:56:42.451608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:56:44.397186 run osmo-stp_10.42.42.5(pid=11465): stderr: | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105642646 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105642647 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105642647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:56:44.549276 run patchelf(pid=11468): Terminating (SIGINT) 10:56:44.727755 run patchelf(pid=11468): Terminated: ok {rc=0} 10:56:44.760287 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=11465): Process ended prematurely: osmo-stp_10.42.42.5(pid=11465) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11465)] [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22] 10:56:44.769775 tst ping.py:22: Test FAILED (6.6 sec) 10:56:44.833202 run osmo-hlr_10.42.42.2(pid=11462): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11462)] 10:56:44.885075 run osmo-hlr_10.42.42.2(pid=11462): stdout: | (launched: 2022-12-13_10:56:41.454745) 10:56:44.937855 run osmo-hlr_10.42.42.2(pid=11462): stderr: | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213105641654 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213105641677 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213105641687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213105641687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213105641687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:56:44.982797 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11461): Terminating (SIGTERM) 10:56:45.025194 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11464): Terminating (SIGTERM) 10:56:45.067462 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11467): Terminating (SIGTERM) 10:56:45.077377 --- ParallelTerminationStrategy: PID 11461 died... 10:56:45.134204 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11461): Terminated: ok {rc=0} 10:56:45.144449 --- ParallelTerminationStrategy: PID 11464 died... 10:56:45.200877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11464): Terminated: ok {rc=0} 10:56:45.211202 --- ParallelTerminationStrategy: PID 11467 died... 10:56:45.267791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11467): Terminated: ok {rc=0} 10:56:45.356222 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11465): Process ended prematurely: osmo-stp_10.42.42.5(pid=11465) [trial-2388↪gprs:trx-lms+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11465)]