Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10528): Process ended prematurely: osmo-stp_10.42.42.5(pid=10528) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10528)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-umtrx+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 10:47:14.997240 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.009275 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 10:47:15.179216 tst iperf3.py: using LAC 33413 10:47:15.308024 tst iperf3.py: using RAC 8 10:47:15.439005 tst iperf3.py: using CellId 33413 10:47:15.567875 tst iperf3.py: using BVCI 33414 10:47:15.593158 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.604428 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.615526 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.626615 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.638210 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.649842 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.661517 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.673004 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 10:47:15.684597 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 10:47:16.004103 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:47:16.135293 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:47:16.474064 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10520): Launched 10:47:16.766955 run iperf3-srv_10.42.42.10(pid=10521): Launched 10:47:16.976367 tst iperf3.py:8: start network... 10:47:17.119585 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:47:17.644353 run create_hlr_db(pid=10522): Launched 10:47:17.834944 bus /gobi_6: Setting Powered False 10:47:18.856614 run create_hlr_db(pid=10522): Terminated: ok {rc=0} 10:47:19.268771 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10524): Launched 10:47:19.577328 run osmo-hlr_10.42.42.2(pid=10525): Launched 10:47:19.690318 run osmo-stp_10.42.42.5: Starting osmo-stp 10:47:20.328475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10527): Launched 10:47:20.630342 run osmo-stp_10.42.42.5(pid=10528): Launched 10:47:20.738050 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:47:21.265109 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10530): Launched 10:47:21.372251 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:47:21.636648 run patchelf(pid=10531): Launched 10:47:21.812570 run osmo-stp_10.42.42.5(pid=10528): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10528)] 10:47:21.941172 run osmo-stp_10.42.42.5(pid=10528): stdout: | (launched: 2022-12-13_10:47:20.481348) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:22.069836 run osmo-stp_10.42.42.5(pid=10528): stderr: | �[0;m�[38;5;43m20221213104720649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104720649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104720650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104720650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104720650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104720651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104720651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:22.195158 run osmo-stp_10.42.42.5(pid=10528): stdout: | (launched: 2022-12-13_10:47:20.481348) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:47:22.318895 run osmo-stp_10.42.42.5(pid=10528): stderr: | �[0;m�[38;5;43m20221213104720649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213104720649 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213104720650 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213104720650 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213104720650 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213104720651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213104720651 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:47:22.463206 run patchelf(pid=10531): Terminating (SIGINT) 10:47:22.632719 run patchelf(pid=10531): Terminated: ok {rc=0} 10:47:22.663980 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10528): Process ended prematurely: osmo-stp_10.42.42.5(pid=10528) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10528)] [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py:8] 10:47:22.673709 tst iperf3.py:8: Test FAILED (7.7 sec) 10:47:22.734029 run osmo-hlr_10.42.42.2(pid=10525): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10525)] 10:47:22.783001 run osmo-hlr_10.42.42.2(pid=10525): stdout: | (launched: 2022-12-13_10:47:19.425284) 10:47:22.832768 run osmo-hlr_10.42.42.2(pid=10525): stderr: | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213104719602 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213104719614 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213104719625 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213104719626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213104719626 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:47:22.874828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10520): Terminating (SIGTERM) 10:47:22.915201 run iperf3-srv_10.42.42.10(pid=10521): Terminating (SIGTERM) 10:47:22.954773 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10524): Terminating (SIGTERM) 10:47:22.994228 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10527): Terminating (SIGTERM) 10:47:23.033723 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10530): Terminating (SIGTERM) 10:47:23.043037 --- ParallelTerminationStrategy: PID 10520 died... 10:47:23.096327 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10520): Terminated: ok {rc=0} 10:47:23.106185 --- ParallelTerminationStrategy: PID 10521 died... 10:47:23.159987 run iperf3-srv_10.42.42.10(pid=10521): Terminated {rc=256} 10:47:23.169801 --- ParallelTerminationStrategy: PID 10524 died... 10:47:23.222710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10524): Terminated: ok {rc=0} 10:47:23.232107 --- ParallelTerminationStrategy: PID 10527 died... 10:47:23.285221 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10527): Terminated: ok {rc=0} 10:47:23.294737 --- ParallelTerminationStrategy: PID 10530 died... 10:47:23.347775 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10530): Terminated: ok {rc=0} 10:47:23.432016 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10528): Process ended prematurely: osmo-stp_10.42.42.5(pid=10528) [trial-2388↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10528)]