Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 250 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=10489): Process ended prematurely: osmo-stp_10.42.42.5(pid=10489) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10489)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
10:46:44.521577 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:44.533958 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
10:46:44.682967 tst                          ping.py: using LAC 33410
10:46:44.810313 tst                          ping.py: using RAC 5
10:46:44.936822 tst                          ping.py: using CellId 33410
10:46:45.063131 tst                          ping.py: using BVCI 33411
10:46:45.087844 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.099677 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.110874 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.121927 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.133427 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.144920 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.156662 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
10:46:45.168409 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
10:46:45.446211 tst                       ping.py:19: start network...
10:46:45.571164 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:46:46.092886 run         create_hlr_db(pid=10483): Launched
10:46:46.269703 bus                          /gobi_6: Setting Powered False
10:46:47.288931 run         create_hlr_db(pid=10483): Terminated: ok {rc=0}
10:46:47.694997 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10485): Launched
10:46:48.000534 run   osmo-hlr_10.42.42.2(pid=10486): Launched
10:46:48.111833 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:46:48.638268 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10488): Launched
10:46:48.938955 run   osmo-stp_10.42.42.5(pid=10489): Launched
10:46:49.047666 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:46:49.573127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10491): Launched
10:46:49.679604 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:46:49.943621 run              patchelf(pid=10492): Launched
10:46:50.119222 run   osmo-stp_10.42.42.5(pid=10489): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10489)]
10:46:50.247464 run   osmo-stp_10.42.42.5(pid=10489): stdout: 
| (launched: 2022-12-13_10:46:48.790697)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:46:50.375949 run   osmo-stp_10.42.42.5(pid=10489): stderr: 
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213104648961 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:46:50.499857 run   osmo-stp_10.42.42.5(pid=10489): stdout: 
| (launched: 2022-12-13_10:46:48.790697)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:46:50.622638 run   osmo-stp_10.42.42.5(pid=10489): stderr: 
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213104648960 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213104648961 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213104648961 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:46:50.765890 run              patchelf(pid=10492): Terminating (SIGINT)
10:46:50.935133 run              patchelf(pid=10492): Terminated: ok {rc=0}
10:46:50.965808 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10489): Process ended prematurely: osmo-stp_10.42.42.5(pid=10489) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10489)]  [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
10:46:50.974448 tst                       ping.py:22: Test FAILED (6.4 sec)
10:46:51.034367 run   osmo-hlr_10.42.42.2(pid=10486): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10486)]
10:46:51.083503 run   osmo-hlr_10.42.42.2(pid=10486): stdout: 
| (launched: 2022-12-13_10:46:47.848551) 
10:46:51.133473 run   osmo-hlr_10.42.42.2(pid=10486): stderr: 
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213104648024 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213104648037 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213104648048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213104648048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213104648048 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:46:51.175872 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10485): Terminating (SIGTERM)
10:46:51.215786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10488): Terminating (SIGTERM)
10:46:51.255632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10491): Terminating (SIGTERM)
10:46:51.264942 ---      ParallelTerminationStrategy: PID 10485 died...
10:46:51.318532 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10485): Terminated: ok {rc=0}
10:46:51.328200 ---      ParallelTerminationStrategy: PID 10488 died...
10:46:51.381290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10488): Terminated: ok {rc=0}
10:46:51.390940 ---      ParallelTerminationStrategy: PID 10491 died...
10:46:51.444489 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10491): Terminated: ok {rc=0}
10:46:51.528802 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10489): Process ended prematurely: osmo-stp_10.42.42.5(pid=10489) [trial-2388↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10489)]