Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11368): Process ended prematurely: osmo-stp_10.42.42.5(pid=11368) [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11368)]
Standard Output
---------------------------------------------- trial-2388 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 10:55:08.880218 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:08.891563 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 10:55:09.029185 tst iperf3.py: using LAC 33455 10:55:09.147688 tst iperf3.py: using RAC 50 10:55:09.267838 tst iperf3.py: using CellId 33455 10:55:09.393271 tst iperf3.py: using BVCI 33456 10:55:09.416324 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.427139 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.437749 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.448257 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.458765 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.469213 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.479795 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.490239 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 10:55:09.500798 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 10:55:09.798842 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 10:55:09.934871 run iperf3-srv_10.42.42.10: Starting iperf3-srv 10:55:10.273940 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11360): Launched 10:55:10.554657 run iperf3-srv_10.42.42.10(pid=11361): Launched 10:55:10.753871 tst iperf3.py:8: start network... 10:55:10.889462 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:55:11.399505 run create_hlr_db(pid=11362): Launched 10:55:11.594551 bus /gobi_6: Setting Powered False 10:55:12.606921 run create_hlr_db(pid=11362): Terminated: ok {rc=0} 10:55:13.016889 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11364): Launched 10:55:13.319230 run osmo-hlr_10.42.42.2(pid=11365): Launched 10:55:13.431114 run osmo-stp_10.42.42.5: Starting osmo-stp 10:55:13.957438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11367): Launched 10:55:14.259685 run osmo-stp_10.42.42.5(pid=11368): Launched 10:55:14.370366 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:55:14.896204 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11370): Launched 10:55:15.002906 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:55:15.264597 run patchelf(pid=11371): Launched 10:55:15.441071 run osmo-stp_10.42.42.5(pid=11368): ERR: Terminated: ERROR {rc=1} [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11368)] 10:55:15.569766 run osmo-stp_10.42.42.5(pid=11368): stdout: | (launched: 2022-12-13_10:55:14.111292) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:55:15.698961 run osmo-stp_10.42.42.5(pid=11368): stderr: | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105514286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:55:15.823649 run osmo-stp_10.42.42.5(pid=11368): stdout: | (launched: 2022-12-13_10:55:14.111292) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:55:15.961622 run osmo-stp_10.42.42.5(pid=11368): stderr: | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213105514285 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213105514286 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213105514286 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:55:16.109644 run patchelf(pid=11371): Terminating (SIGINT) 10:55:16.282774 run patchelf(pid=11371): Terminated: ok {rc=0} 10:55:16.315562 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11368): Process ended prematurely: osmo-stp_10.42.42.5(pid=11368) [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11368)] [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 10:55:16.325933 tst iperf3.py:8: Test FAILED (7.5 sec) 10:55:16.387271 run osmo-hlr_10.42.42.2(pid=11365): ERR: Terminated: ERROR {rc=237} [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11365)] 10:55:16.438638 run osmo-hlr_10.42.42.2(pid=11365): stdout: | (launched: 2022-12-13_10:55:13.170501) 10:55:16.489164 run osmo-hlr_10.42.42.2(pid=11365): stderr: | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213105513346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213105513358 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213105513368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213105513368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213105513368 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:55:16.532183 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11360): Terminating (SIGTERM) 10:55:16.574828 run iperf3-srv_10.42.42.10(pid=11361): Terminating (SIGTERM) 10:55:16.617693 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11364): Terminating (SIGTERM) 10:55:16.658681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11367): Terminating (SIGTERM) 10:55:16.702682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11370): Terminating (SIGTERM) 10:55:16.712161 --- ParallelTerminationStrategy: PID 11360 died... 10:55:16.766310 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11360): Terminated: ok {rc=0} 10:55:16.776295 --- ParallelTerminationStrategy: PID 11361 died... 10:55:16.830428 run iperf3-srv_10.42.42.10(pid=11361): Terminated {rc=256} 10:55:16.840361 --- ParallelTerminationStrategy: PID 11364 died... 10:55:16.894213 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11364): Terminated: ok {rc=0} 10:55:16.904166 --- ParallelTerminationStrategy: PID 11367 died... 10:55:16.957907 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11367): Terminated: ok {rc=0} 10:55:16.967918 --- ParallelTerminationStrategy: PID 11370 died... 10:55:17.021734 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11370): Terminated: ok {rc=0} 10:55:17.106720 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11368): Process ended prematurely: osmo-stp_10.42.42.5(pid=11368) [trial-2388↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11368)]