Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)

Failing for the past 250 builds (Since #2139 )
Took 9 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=9950): Process ended prematurely: osmo-stp_10.42.42.5(pid=9950) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9950)]

Standard Output

----------------------------------------------
trial-2388 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
10:38:58.886021 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:58.898813 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
10:38:59.063635 tst                        iperf3.py: using LAC 33369
10:38:59.188526 tst                        iperf3.py: using RAC 219
10:38:59.314087 tst                        iperf3.py: using CellId 33369
10:38:59.438713 tst                        iperf3.py: using BVCI 33370
10:38:59.463538 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.475611 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.487653 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.499689 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.511747 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.524750 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.538724 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.550721 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
10:38:59.563113 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
10:38:59.849815 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
10:38:59.982080 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
10:39:00.318184 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9942): Launched
10:39:00.608050 run iperf3-srv_10.42.42.10(pid=9943): Launched
10:39:00.802829 tst                      iperf3.py:8: start network...
10:39:00.945146 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
10:39:01.550252 run          create_hlr_db(pid=9944): Launched
10:39:01.769245 bus                          /gobi_6: Setting Powered False
10:39:02.800699 run          create_hlr_db(pid=9944): Terminated: ok {rc=0}
10:39:03.276001 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9946): Launched
10:39:03.716036 run    osmo-hlr_10.42.42.2(pid=9947): Launched
10:39:03.962269 run              osmo-stp_10.42.42.5: Starting osmo-stp
10:39:04.559566 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9949): Launched
10:39:04.991915 run    osmo-stp_10.42.42.5(pid=9950): Launched
10:39:05.217688 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
10:39:05.815817 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9952): Launched
10:39:05.938633 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
10:39:06.244916 run               patchelf(pid=9953): Launched
10:39:06.444027 run    osmo-stp_10.42.42.5(pid=9950): ERR: Terminated: ERROR {rc=1}  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9950)]
10:39:06.590424 run    osmo-stp_10.42.42.5(pid=9950): stdout: 
| (launched: 2022-12-13_10:39:04.732477)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:39:06.736698 run    osmo-stp_10.42.42.5(pid=9950): stderr: 
| �[0;m�[38;5;43m20221213103905028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213103905029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213103905029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213103905029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:39:06.877085 run    osmo-stp_10.42.42.5(pid=9950): stdout: 
| (launched: 2022-12-13_10:39:04.732477)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
10:39:07.016252 run    osmo-stp_10.42.42.5(pid=9950): stderr: 
| �[0;m�[38;5;43m20221213103905028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213103905029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213103905029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213103905029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213103905030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
10:39:07.179059 run               patchelf(pid=9953): Terminating (SIGINT)
10:39:07.370602 run               patchelf(pid=9953): Terminated: ok {rc=0}
10:39:07.405422 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=9950): Process ended prematurely: osmo-stp_10.42.42.5(pid=9950) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9950)]  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8]
10:39:07.415469 tst                      iperf3.py:8: Test FAILED (8.6 sec)
10:39:07.483512 run    osmo-hlr_10.42.42.2(pid=9947): ERR: Terminated: ERROR {rc=237}  [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9947)]
10:39:07.540642 run    osmo-hlr_10.42.42.2(pid=9947): stdout: 
| (launched: 2022-12-13_10:39:03.448120) 
10:39:07.597011 run    osmo-hlr_10.42.42.2(pid=9947): stderr: 
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213103903757 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213103903777 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2388/run.2022-12-13_10-04-59/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213103903789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213103903789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213103903789 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
10:39:07.644156 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9942): Terminating (SIGTERM)
10:39:07.691269 run iperf3-srv_10.42.42.10(pid=9943): Terminating (SIGTERM)
10:39:07.739367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9946): Terminating (SIGTERM)
10:39:07.786365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9949): Terminating (SIGTERM)
10:39:07.833836 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9952): Terminating (SIGTERM)
10:39:07.844471 ---      ParallelTerminationStrategy: PID 9942 died...
10:39:07.907016 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9942): Terminated: ok {rc=0}
10:39:07.919445 ---      ParallelTerminationStrategy: PID 9943 died...
10:39:07.980290 run iperf3-srv_10.42.42.10(pid=9943): Terminated {rc=256}
10:39:07.992236 ---      ParallelTerminationStrategy: PID 9946 died...
10:39:08.051377 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9946): Terminated: ok {rc=0}
10:39:08.063351 ---      ParallelTerminationStrategy: PID 9949 died...
10:39:08.123666 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9949): Terminated: ok {rc=0}
10:39:08.135820 ---      ParallelTerminationStrategy: PID 9952 died...
10:39:08.194840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9952): Terminated: ok {rc=0}
10:39:08.288200 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9950): Process ended prematurely: osmo-stp_10.42.42.5(pid=9950) [trial-2388↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9950)]