Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=19271): Process ended prematurely: osmo-stp_10.42.42.5(pid=19271) [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19271)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping.py ---------------------------------------------- 12:17:33.514674 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:33.527522 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:17:33.675950 tst ping.py: using LAC 33886 12:17:33.803101 tst ping.py: using RAC 226 12:17:33.928288 tst ping.py: using CellId 33886 12:17:34.059037 tst ping.py: using BVCI 33887 12:17:34.083638 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.095470 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.107172 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.118852 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.130874 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.142824 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.154912 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:17:34.166838 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:17:34.445706 tst ping.py:19: start network... 12:17:34.571008 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:17:35.052116 run create_hlr_db(pid=19265): Launched 12:17:35.226455 bus /gobi_6: Setting Powered False 12:17:36.246208 run create_hlr_db(pid=19265): Terminated: ok {rc=0} 12:17:36.675531 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19267): Launched 12:17:36.998358 run osmo-hlr_10.42.42.2(pid=19268): Launched 12:17:37.118677 run osmo-stp_10.42.42.5: Starting osmo-stp 12:17:37.681978 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19270): Launched 12:17:38.005736 run osmo-stp_10.42.42.5(pid=19271): Launched 12:17:38.122491 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:17:38.683776 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19273): Launched 12:17:38.799268 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:17:39.081846 run patchelf(pid=19274): Launched 12:17:39.271191 run osmo-stp_10.42.42.5(pid=19271): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19271)] 12:17:39.410051 run osmo-stp_10.42.42.5(pid=19271): stdout: | (launched: 2022-12-13_12:17:37.846992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:17:39.548748 run osmo-stp_10.42.42.5(pid=19271): stderr: | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121738037 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121738037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121738037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121738038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:17:39.682417 run osmo-stp_10.42.42.5(pid=19271): stdout: | (launched: 2022-12-13_12:17:37.846992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:17:39.815341 run osmo-stp_10.42.42.5(pid=19271): stderr: | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213121738036 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213121738037 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213121738037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213121738037 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213121738038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:17:39.969751 run patchelf(pid=19274): Terminating (SIGINT) 12:17:40.149988 run patchelf(pid=19274): Terminated: ok {rc=0} 12:17:40.182713 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=19271): Process ended prematurely: osmo-stp_10.42.42.5(pid=19271) [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19271)] [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22] 12:17:40.192321 tst ping.py:22: Test FAILED (6.7 sec) 12:17:40.256205 run osmo-hlr_10.42.42.2(pid=19268): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19268)] 12:17:40.308362 run osmo-hlr_10.42.42.2(pid=19268): stdout: | (launched: 2022-12-13_12:17:36.838673) 12:17:40.361305 run osmo-hlr_10.42.42.2(pid=19268): stderr: | �[0;m�[1;31m20221213121737031 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213121737032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213121737032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213121737032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213121737032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213121737032 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213121737044 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213121737054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213121737054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213121737054 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:17:40.406154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19267): Terminating (SIGTERM) 12:17:40.448996 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19270): Terminating (SIGTERM) 12:17:40.491246 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19273): Terminating (SIGTERM) 12:17:40.500935 --- ParallelTerminationStrategy: PID 19267 died... 12:17:40.557677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19267): Terminated: ok {rc=0} 12:17:40.567738 --- ParallelTerminationStrategy: PID 19270 died... 12:17:40.624582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19270): Terminated: ok {rc=0} 12:17:40.634758 --- ParallelTerminationStrategy: PID 19273 died... 12:17:40.691813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19273): Terminated: ok {rc=0} 12:17:40.780029 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19271): Process ended prematurely: osmo-stp_10.42.42.5(pid=19271) [trial-2389↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19271)]