Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20069): Process ended prematurely: osmo-stp_10.42.42.5(pid=20069) [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20069)]
Standard Output
---------------------------------------------- trial-2389 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 12:25:03.154909 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.166549 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:25:03.326080 tst iperf3.py: using LAC 33926 12:25:03.449074 tst iperf3.py: using RAC 11 12:25:03.572203 tst iperf3.py: using CellId 33926 12:25:03.695471 tst iperf3.py: using BVCI 33927 12:25:03.719191 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.730202 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.740998 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.751680 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.762478 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.773236 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.784010 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.794728 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:25:03.805536 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:25:04.086842 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 12:25:04.214803 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:25:04.537688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20061): Launched 12:25:04.806001 run iperf3-srv_10.42.42.10(pid=20062): Launched 12:25:04.994551 tst iperf3.py:8: start network... 12:25:05.123117 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:25:05.618932 run create_hlr_db(pid=20063): Launched 12:25:05.795963 bus /gobi_6: Setting Powered False 12:25:06.818437 run create_hlr_db(pid=20063): Terminated: ok {rc=0} 12:25:07.229064 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20065): Launched 12:25:07.538582 run osmo-hlr_10.42.42.2(pid=20066): Launched 12:25:07.655635 run osmo-stp_10.42.42.5: Starting osmo-stp 12:25:08.191643 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20068): Launched 12:25:08.499924 run osmo-stp_10.42.42.5(pid=20069): Launched 12:25:08.611889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:25:09.152225 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20071): Launched 12:25:09.261720 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:25:09.530816 run patchelf(pid=20072): Launched 12:25:09.710741 run osmo-stp_10.42.42.5(pid=20069): ERR: Terminated: ERROR {rc=1} [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20069)] 12:25:09.842449 run osmo-stp_10.42.42.5(pid=20069): stdout: | (launched: 2022-12-13_12:25:08.348014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:25:09.974254 run osmo-stp_10.42.42.5(pid=20069): stderr: | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213122508518 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:25:10.101265 run osmo-stp_10.42.42.5(pid=20069): stdout: | (launched: 2022-12-13_12:25:08.348014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:25:10.227202 run osmo-stp_10.42.42.5(pid=20069): stderr: | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213122508517 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213122508518 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213122508518 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:25:10.374118 run patchelf(pid=20072): Terminating (SIGINT) 12:25:10.546866 run patchelf(pid=20072): Terminated: ok {rc=0} 12:25:10.578760 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20069): Process ended prematurely: osmo-stp_10.42.42.5(pid=20069) [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20069)] [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 12:25:10.588165 tst iperf3.py:8: Test FAILED (7.5 sec) 12:25:10.648895 run osmo-hlr_10.42.42.2(pid=20066): ERR: Terminated: ERROR {rc=237} [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20066)] 12:25:10.698320 run osmo-hlr_10.42.42.2(pid=20066): stdout: | (launched: 2022-12-13_12:25:07.385477) 12:25:10.748505 run osmo-hlr_10.42.42.2(pid=20066): stderr: | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213122507562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213122507574 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2389/run.2022-12-13_11-32-52/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213122507585 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213122507586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213122507586 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:25:10.791560 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20061): Terminating (SIGTERM) 12:25:10.831627 run iperf3-srv_10.42.42.10(pid=20062): Terminating (SIGTERM) 12:25:10.871757 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20065): Terminating (SIGTERM) 12:25:10.911726 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20068): Terminating (SIGTERM) 12:25:10.951749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20071): Terminating (SIGTERM) 12:25:10.961461 --- ParallelTerminationStrategy: PID 20061 died... 12:25:11.015340 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20061): Terminated: ok {rc=0} 12:25:11.025262 --- ParallelTerminationStrategy: PID 20062 died... 12:25:11.078981 run iperf3-srv_10.42.42.10(pid=20062): Terminated {rc=256} 12:25:11.088635 --- ParallelTerminationStrategy: PID 20065 died... 12:25:11.142677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20065): Terminated: ok {rc=0} 12:25:11.152444 --- ParallelTerminationStrategy: PID 20068 died... 12:25:11.206000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20068): Terminated: ok {rc=0} 12:25:11.215769 --- ParallelTerminationStrategy: PID 20071 died... 12:25:11.269471 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20071): Terminated: ok {rc=0} 12:25:11.353727 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20069): Process ended prematurely: osmo-stp_10.42.42.5(pid=20069) [trial-2389↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20069)]