Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30305): Process ended prematurely: osmo-stp_10.42.42.5(pid=30305) [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30305)]
Standard Output
---------------------------------------------- trial-2390 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 14:12:44.498227 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:44.510741 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 14:12:44.658134 tst ping.py: using LAC 34492 14:12:44.785509 tst ping.py: using RAC 67 14:12:44.914017 tst ping.py: using CellId 34492 14:12:45.042451 tst ping.py: using BVCI 34493 14:12:45.067442 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.079131 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.090634 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.102434 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.114248 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.125933 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.137926 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:12:45.149659 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:12:45.428103 tst ping.py:19: start network... 14:12:45.553472 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:12:46.090777 run create_hlr_db(pid=30299): Launched 14:12:46.268723 bus /gobi_6: Setting Powered False 14:12:47.319604 run create_hlr_db(pid=30299): Terminated: ok {rc=0} 14:12:47.729223 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30301): Launched 14:12:48.033194 run osmo-hlr_10.42.42.2(pid=30302): Launched 14:12:48.153513 run osmo-stp_10.42.42.5: Starting osmo-stp 14:12:48.691302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30304): Launched 14:12:48.995874 run osmo-stp_10.42.42.5(pid=30305): Launched 14:12:49.105515 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:12:49.640286 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30307): Launched 14:12:49.747726 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:12:50.015689 run patchelf(pid=30308): Launched 14:12:50.194948 run osmo-stp_10.42.42.5(pid=30305): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30305)] 14:12:50.324527 run osmo-stp_10.42.42.5(pid=30305): stdout: | (launched: 2022-12-13_14:12:48.844529) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:12:50.454871 run osmo-stp_10.42.42.5(pid=30305): stderr: | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141249016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:12:50.579699 run osmo-stp_10.42.42.5(pid=30305): stdout: | (launched: 2022-12-13_14:12:48.844529) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:12:50.703599 run osmo-stp_10.42.42.5(pid=30305): stderr: | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213141249016 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213141249016 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213141249017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:12:50.847694 run patchelf(pid=30308): Terminating (SIGINT) 14:12:51.017816 run patchelf(pid=30308): Terminated: ok {rc=0} 14:12:51.048581 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=30305): Process ended prematurely: osmo-stp_10.42.42.5(pid=30305) [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30305)] [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 14:12:51.057314 tst ping.py:22: Test FAILED (6.5 sec) 14:12:51.117842 run osmo-hlr_10.42.42.2(pid=30302): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30302)] 14:12:51.166819 run osmo-hlr_10.42.42.2(pid=30302): stdout: | (launched: 2022-12-13_14:12:47.882266) 14:12:51.216665 run osmo-hlr_10.42.42.2(pid=30302): stderr: | �[0;m�[1;31m20221213141248057 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213141248058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213141248058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213141248058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213141248058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213141248058 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213141248070 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213141248078 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213141248079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213141248079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:12:51.259362 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30301): Terminating (SIGTERM) 14:12:51.299391 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30304): Terminating (SIGTERM) 14:12:51.339012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30307): Terminating (SIGTERM) 14:12:51.348413 --- ParallelTerminationStrategy: PID 30301 died... 14:12:51.401974 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30301): Terminated: ok {rc=0} 14:12:51.411715 --- ParallelTerminationStrategy: PID 30304 died... 14:12:51.465102 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30304): Terminated: ok {rc=0} 14:12:51.474834 --- ParallelTerminationStrategy: PID 30307 died... 14:12:51.527978 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30307): Terminated: ok {rc=0} 14:12:51.616872 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30305): Process ended prematurely: osmo-stp_10.42.42.5(pid=30305) [trial-2390↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30305)]