Failed
gprs:sysmo+mod-bts0-dynts-ipa.iperf3.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24760): Process ended prematurely: osmo-stp_10.42.42.5(pid=24760) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24760)]
Standard Output
---------------------------------------------- trial-2390 gprs:sysmo+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 13:09:17.618337 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:17.630457 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:09:17.788385 tst iperf3.py: using LAC 34156 13:09:17.920339 tst iperf3.py: using RAC 241 13:09:18.045939 tst iperf3.py: using CellId 34156 13:09:18.171074 tst iperf3.py: using BVCI 34157 13:09:18.195230 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.206894 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.217900 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.228710 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.239665 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.250786 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.261934 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.272837 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:09:18.283972 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:09:18.586352 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:09:18.726674 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:09:19.074020 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24752): Launched 13:09:19.366074 run iperf3-srv_10.42.42.10(pid=24753): Launched 13:09:19.571127 tst iperf3.py:8: start network... 13:09:19.710619 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:09:20.237603 run create_hlr_db(pid=24754): Launched 13:09:20.430921 bus /gobi_6: Setting Powered False 13:09:21.451633 run create_hlr_db(pid=24754): Terminated: ok {rc=0} 13:09:21.873532 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24756): Launched 13:09:22.188059 run osmo-hlr_10.42.42.2(pid=24757): Launched 13:09:22.303232 run osmo-stp_10.42.42.5: Starting osmo-stp 13:09:22.850288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24759): Launched 13:09:23.165201 run osmo-stp_10.42.42.5(pid=24760): Launched 13:09:23.278307 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:09:23.823244 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24762): Launched 13:09:23.934698 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:09:24.208463 run patchelf(pid=24763): Launched 13:09:24.390902 run osmo-stp_10.42.42.5(pid=24760): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24760)] 13:09:24.524289 run osmo-stp_10.42.42.5(pid=24760): stdout: | (launched: 2022-12-13_13:09:23.008661) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:24.659205 run osmo-stp_10.42.42.5(pid=24760): stderr: | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130923182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:24.788179 run osmo-stp_10.42.42.5(pid=24760): stdout: | (launched: 2022-12-13_13:09:23.008661) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:24.916157 run osmo-stp_10.42.42.5(pid=24760): stderr: | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213130923181 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213130923182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213130923184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:25.065502 run patchelf(pid=24763): Terminating (SIGINT) 13:09:25.240788 run patchelf(pid=24763): Terminated: ok {rc=0} 13:09:25.272811 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24760): Process ended prematurely: osmo-stp_10.42.42.5(pid=24760) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24760)] [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8] 13:09:25.282080 tst iperf3.py:8: Test FAILED (7.7 sec) 13:09:25.342660 run osmo-hlr_10.42.42.2(pid=24757): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24757)] 13:09:25.392146 run osmo-hlr_10.42.42.2(pid=24757): stdout: | (launched: 2022-12-13_13:09:22.032410) 13:09:25.442079 run osmo-hlr_10.42.42.2(pid=24757): stderr: | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213130922212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213130922228 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:sysmo+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213130922239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213130922239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213130922239 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:09:25.485060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24752): Terminating (SIGTERM) 13:09:25.525312 run iperf3-srv_10.42.42.10(pid=24753): Terminating (SIGTERM) 13:09:25.565819 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24756): Terminating (SIGTERM) 13:09:25.606156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24759): Terminating (SIGTERM) 13:09:25.646581 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24762): Terminating (SIGTERM) 13:09:25.655900 --- ParallelTerminationStrategy: PID 24752 died... 13:09:25.710124 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24752): Terminated: ok {rc=0} 13:09:25.719911 --- ParallelTerminationStrategy: PID 24753 died... 13:09:25.773660 run iperf3-srv_10.42.42.10(pid=24753): Terminated {rc=256} 13:09:25.783379 --- ParallelTerminationStrategy: PID 24756 died... 13:09:25.837667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24756): Terminated: ok {rc=0} 13:09:25.847514 --- ParallelTerminationStrategy: PID 24759 died... 13:09:25.901498 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24759): Terminated: ok {rc=0} 13:09:25.911270 --- ParallelTerminationStrategy: PID 24762 died... 13:09:25.964935 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24762): Terminated: ok {rc=0} 13:09:26.054186 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24760): Process ended prematurely: osmo-stp_10.42.42.5(pid=24760) [trial-2390↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24760)]