Failed
gprs:trx-lms-limenet-micro+mod-bts0-egprs.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29065): Process ended prematurely: osmo-stp_10.42.42.5(pid=29065) [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29065)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-lms-limenet-micro+mod-bts0-egprs iperf3.py ---------------------------------------------- 13:58:50.695599 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:50.707201 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:58:50.847822 tst iperf3.py: using LAC 34419 13:58:50.967662 tst iperf3.py: using RAC 249 13:58:51.087562 tst iperf3.py: using CellId 34419 13:58:51.206668 tst iperf3.py: using BVCI 34420 13:58:51.229535 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.240450 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.251337 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.262098 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.272728 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.283512 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.294409 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.305072 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:58:51.315921 tst gprs:trx-lms-limenet-micro+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:58:51.591301 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 13:58:51.714954 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:58:52.025230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29057): Launched 13:58:52.283130 run iperf3-srv_10.42.42.10(pid=29058): Launched 13:58:52.464890 tst iperf3.py:8: start network... 13:58:52.588830 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:58:53.074485 run create_hlr_db(pid=29059): Launched 13:58:53.246443 bus /gobi_6: Setting Powered False 13:58:54.268739 run create_hlr_db(pid=29059): Terminated: ok {rc=0} 13:58:54.697396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29061): Launched 13:58:55.023188 run osmo-hlr_10.42.42.2(pid=29062): Launched 13:58:55.141903 run osmo-stp_10.42.42.5: Starting osmo-stp 13:58:55.704879 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29064): Launched 13:58:56.027198 run osmo-stp_10.42.42.5(pid=29065): Launched 13:58:56.142934 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:58:56.703240 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29067): Launched 13:58:56.818006 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:58:57.099313 run patchelf(pid=29068): Launched 13:58:57.286462 run osmo-stp_10.42.42.5(pid=29065): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29065)] 13:58:57.423169 run osmo-stp_10.42.42.5(pid=29065): stdout: | (launched: 2022-12-13_13:58:55.867961) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:57.560808 run osmo-stp_10.42.42.5(pid=29065): stderr: | �[0;m�[38;5;43m20221213135856057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135856057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135856058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135856058 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:57.693341 run osmo-stp_10.42.42.5(pid=29065): stdout: | (launched: 2022-12-13_13:58:55.867961) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:58:57.824813 run osmo-stp_10.42.42.5(pid=29065): stderr: | �[0;m�[38;5;43m20221213135856057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213135856057 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213135856058 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213135856058 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213135856059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:58:57.978364 run patchelf(pid=29068): Terminating (SIGINT) 13:58:58.158642 run patchelf(pid=29068): Terminated: ok {rc=0} 13:58:58.191744 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29065): Process ended prematurely: osmo-stp_10.42.42.5(pid=29065) [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29065)] [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8] 13:58:58.201956 tst iperf3.py:8: Test FAILED (7.5 sec) 13:58:58.264826 run osmo-hlr_10.42.42.2(pid=29062): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29062)] 13:58:58.315792 run osmo-hlr_10.42.42.2(pid=29062): stdout: | (launched: 2022-12-13_13:58:54.862782) 13:58:58.367564 run osmo-hlr_10.42.42.2(pid=29062): stderr: | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213135855059 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213135855072 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms-limenet-micro+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213135855080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213135855080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213135855080 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:58:58.412171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29057): Terminating (SIGTERM) 13:58:58.454101 run iperf3-srv_10.42.42.10(pid=29058): Terminating (SIGTERM) 13:58:58.496109 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29061): Terminating (SIGTERM) 13:58:58.538235 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29064): Terminating (SIGTERM) 13:58:58.580511 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29067): Terminating (SIGTERM) 13:58:58.590274 --- ParallelTerminationStrategy: PID 29057 died... 13:58:58.646426 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29057): Terminated: ok {rc=0} 13:58:58.656493 --- ParallelTerminationStrategy: PID 29058 died... 13:58:58.712135 run iperf3-srv_10.42.42.10(pid=29058): Terminated {rc=256} 13:58:58.722164 --- ParallelTerminationStrategy: PID 29061 died... 13:58:58.777896 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29061): Terminated: ok {rc=0} 13:58:58.787711 --- ParallelTerminationStrategy: PID 29064 died... 13:58:58.843642 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29064): Terminated: ok {rc=0} 13:58:58.853682 --- ParallelTerminationStrategy: PID 29067 died... 13:58:58.909513 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29067): Terminated: ok {rc=0} 13:58:58.995006 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29065): Process ended prematurely: osmo-stp_10.42.42.5(pid=29065) [trial-2390↪gprs:trx-lms-limenet-micro+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29065)]