Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 71 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=28214): Process ended prematurely: osmo-stp_10.42.42.5(pid=28214) [trial-2390↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28214)]

Standard Output

----------------------------------------------
trial-2390 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
13:50:35.373110 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.389046 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
13:50:35.522698 tst                ping_idle_ping.py: using LAC 34375
13:50:35.639785 tst                ping_idle_ping.py: using RAC 205
13:50:35.758151 tst                ping_idle_ping.py: using CellId 34375
13:50:35.874275 tst                ping_idle_ping.py: using BVCI 34376
13:50:35.897004 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.907705 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.918350 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.928664 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.939478 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.950002 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.960574 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
13:50:35.971544 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
13:50:36.248619 tst             ping_idle_ping.py:24: start network...
13:50:36.372047 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
13:50:36.851005 run         create_hlr_db(pid=28208): Launched
13:50:37.022946 bus                          /gobi_6: Setting Powered False
13:50:38.043797 run         create_hlr_db(pid=28208): Terminated: ok {rc=0}
13:50:38.441841 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28210): Launched
13:50:38.740569 run   osmo-hlr_10.42.42.2(pid=28211): Launched
13:50:38.849789 run              osmo-stp_10.42.42.5: Starting osmo-stp
13:50:39.365553 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28213): Launched
13:50:39.663472 run   osmo-stp_10.42.42.5(pid=28214): Launched
13:50:39.771083 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
13:50:40.287813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28216): Launched
13:50:40.392739 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
13:50:40.651939 run              patchelf(pid=28217): Launched
13:50:40.825615 run   osmo-stp_10.42.42.5(pid=28214): ERR: Terminated: ERROR {rc=1}  [trial-2390↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28214)]
13:50:40.952397 run   osmo-stp_10.42.42.5(pid=28214): stdout: 
| (launched: 2022-12-13_13:50:39.516742)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:50:41.079739 run   osmo-stp_10.42.42.5(pid=28214): stderr: 
| �[0;m�[38;5;43m20221213135039687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135039688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135039688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135039688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:50:41.202532 run   osmo-stp_10.42.42.5(pid=28214): stdout: 
| (launched: 2022-12-13_13:50:39.516742)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
13:50:41.323869 run   osmo-stp_10.42.42.5(pid=28214): stderr: 
| �[0;m�[38;5;43m20221213135039687 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213135039688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213135039688 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213135039688 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213135039689 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
13:50:41.465556 run              patchelf(pid=28217): Terminating (SIGINT)
13:50:41.633093 run              patchelf(pid=28217): Terminated: ok {rc=0}
13:50:41.663669 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28214): Process ended prematurely: osmo-stp_10.42.42.5(pid=28214) [trial-2390↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28214)]  [trial-2390↪gprs:trx-lms↪ping_idle_ping.py:27]
13:50:41.672367 tst             ping_idle_ping.py:27: Test FAILED (6.3 sec)
13:50:41.731070 run   osmo-hlr_10.42.42.2(pid=28211): ERR: Terminated: ERROR {rc=237}  [trial-2390↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28211)]
13:50:41.779107 run   osmo-hlr_10.42.42.2(pid=28211): stdout: 
| (launched: 2022-12-13_13:50:38.593129) 
13:50:41.827704 run   osmo-hlr_10.42.42.2(pid=28211): stderr: 
| �[0;m�[1;31m20221213135038766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213135038766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213135038766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213135038766 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213135038767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213135038767 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213135038779 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213135038788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213135038788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213135038788 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
13:50:41.869063 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28210): Terminating (SIGTERM)
13:50:41.909006 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28213): Terminating (SIGTERM)
13:50:41.949074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28216): Terminating (SIGTERM)
13:50:41.958247 ---      ParallelTerminationStrategy: PID 28210 died...
13:50:42.010796 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28210): Terminated: ok {rc=0}
13:50:42.020232 ---      ParallelTerminationStrategy: PID 28213 died...
13:50:42.072457 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28213): Terminated: ok {rc=0}
13:50:42.081895 ---      ParallelTerminationStrategy: PID 28216 died...
13:50:42.134301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28216): Terminated: ok {rc=0}
13:50:42.216581 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28214): Process ended prematurely: osmo-stp_10.42.42.5(pid=28214) [trial-2390↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28214)]