Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)]
Standard Output
---------------------------------------------- trial-2390 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 13:35:13.117255 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.128826 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:35:13.287116 tst ping.py: using LAC 34293 13:35:13.406459 tst ping.py: using RAC 123 13:35:13.523693 tst ping.py: using CellId 34293 13:35:13.643105 tst ping.py: using BVCI 34294 13:35:13.665888 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.677131 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.688063 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.699084 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.710528 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.722048 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.733715 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:35:13.745106 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:35:14.021538 tst ping.py:19: start network... 13:35:14.146281 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:35:14.624562 run create_hlr_db(pid=26865): Launched 13:35:14.796552 bus /gobi_6: Setting Powered False 13:35:15.818449 run create_hlr_db(pid=26865): Terminated: ok {rc=0} 13:35:16.302892 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Launched 13:35:16.714714 run osmo-hlr_10.42.42.2(pid=26868): Launched 13:35:16.932887 run osmo-stp_10.42.42.5: Starting osmo-stp 13:35:17.546858 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Launched 13:35:17.846220 run osmo-stp_10.42.42.5(pid=26871): Launched 13:35:17.954912 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:35:18.481130 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Launched 13:35:18.587207 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:35:18.849026 run patchelf(pid=26874): Launched 13:35:19.024313 run osmo-stp_10.42.42.5(pid=26871): ERR: Terminated: ERROR {rc=1} [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)] 13:35:19.153625 run osmo-stp_10.42.42.5(pid=26871): stdout: | (launched: 2022-12-13_13:35:17.698613) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:35:19.282031 run osmo-stp_10.42.42.5(pid=26871): stderr: | �[0;m�[38;5;43m20221213133517864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213133517865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213133517865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213133517865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:35:19.405808 run osmo-stp_10.42.42.5(pid=26871): stdout: | (launched: 2022-12-13_13:35:17.698613) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:35:19.528506 run osmo-stp_10.42.42.5(pid=26871): stderr: | �[0;m�[38;5;43m20221213133517864 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213133517865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213133517865 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213133517865 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213133517866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:35:19.671313 run patchelf(pid=26874): Terminating (SIGINT) 13:35:19.839413 run patchelf(pid=26874): Terminated: ok {rc=0} 13:35:19.870017 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)] [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22] 13:35:19.878678 tst ping.py:22: Test FAILED (6.8 sec) 13:35:19.938757 run osmo-hlr_10.42.42.2(pid=26868): ERR: Terminated: ERROR {rc=237} [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26868)] 13:35:19.987911 run osmo-hlr_10.42.42.2(pid=26868): stdout: | (launched: 2022-12-13_13:35:16.470968) 13:35:20.037552 run osmo-hlr_10.42.42.2(pid=26868): stderr: | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213133516796 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213133516823 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2390/run.2022-12-13_13-01-08/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213133516840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213133516840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213133516840 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:35:20.079973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Terminating (SIGTERM) 13:35:20.120307 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Terminating (SIGTERM) 13:35:20.160282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Terminating (SIGTERM) 13:35:20.169885 --- ParallelTerminationStrategy: PID 26867 died... 13:35:20.223567 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26867): Terminated: ok {rc=0} 13:35:20.233197 --- ParallelTerminationStrategy: PID 26870 died... 13:35:20.286285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26870): Terminated: ok {rc=0} 13:35:20.295842 --- ParallelTerminationStrategy: PID 26873 died... 13:35:20.348803 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26873): Terminated: ok {rc=0} 13:35:20.436033 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26871): Process ended prematurely: osmo-stp_10.42.42.5(pid=26871) [trial-2390↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26871)]