Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)

Failing for the past 253 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7306): Process ended prematurely: osmo-stp_10.42.42.5(pid=7306) [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7306)]

Standard Output

----------------------------------------------
trial-2391 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py
----------------------------------------------
16:44:40.882244 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:40.894157 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1)
16:44:41.046592 tst                        iperf3.py: using LAC 34923
16:44:41.170449 tst                        iperf3.py: using RAC 243
16:44:41.294285 tst                        iperf3.py: using CellId 34923
16:44:41.418444 tst                        iperf3.py: using BVCI 34924
16:44:41.442344 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.453593 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.464410 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.475323 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.486183 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.497186 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.508150 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.519074 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9)
16:44:41.530127 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4)
16:44:41.812693 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
16:44:41.942040 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
16:44:42.267153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7298): Launched
16:44:42.538237 run iperf3-srv_10.42.42.10(pid=7299): Launched
16:44:42.728235 tst                      iperf3.py:8: start network...
16:44:42.858106 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
16:44:43.357633 run          create_hlr_db(pid=7300): Launched
16:44:43.535927 bus                          /gobi_6: Setting Powered False
16:44:44.558102 run          create_hlr_db(pid=7300): Terminated: ok {rc=0}
16:44:45.002244 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7302): Launched
16:44:45.338059 run    osmo-hlr_10.42.42.2(pid=7303): Launched
16:44:45.461281 run              osmo-stp_10.42.42.5: Starting osmo-stp
16:44:46.064408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7305): Launched
16:44:46.486325 run    osmo-stp_10.42.42.5(pid=7306): Launched
16:44:46.729599 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
16:44:47.341322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7308): Launched
16:44:47.452265 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
16:44:47.727015 run               patchelf(pid=7309): Launched
16:44:47.910071 run    osmo-stp_10.42.42.5(pid=7306): ERR: Terminated: ERROR {rc=1}  [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7306)]
16:44:48.044154 run    osmo-stp_10.42.42.5(pid=7306): stdout: 
| (launched: 2022-12-13_16:44:46.227910)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:44:48.178054 run    osmo-stp_10.42.42.5(pid=7306): stderr: 
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213164446554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:44:48.307028 run    osmo-stp_10.42.42.5(pid=7306): stdout: 
| (launched: 2022-12-13_16:44:46.227910)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
16:44:48.435765 run    osmo-stp_10.42.42.5(pid=7306): stderr: 
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213164446554 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213164446554 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213164446555 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
16:44:48.585141 run               patchelf(pid=7309): Terminating (SIGINT)
16:44:48.761495 run               patchelf(pid=7309): Terminated: ok {rc=0}
16:44:48.793637 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7306): Process ended prematurely: osmo-stp_10.42.42.5(pid=7306) [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7306)]  [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8]
16:44:48.802974 tst                      iperf3.py:8: Test FAILED (8.0 sec)
16:44:48.863589 run    osmo-hlr_10.42.42.2(pid=7303): ERR: Terminated: ERROR {rc=237}  [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7303)]
16:44:48.912917 run    osmo-hlr_10.42.42.2(pid=7303): stdout: 
| (launched: 2022-12-13_16:44:45.172146) 
16:44:48.962684 run    osmo-hlr_10.42.42.2(pid=7303): stderr: 
| �[0;m�[1;31m20221213164445372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213164445372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213164445373 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213164445373 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213164445373 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213164445373 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213164445386 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213164445395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213164445395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213164445395 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
16:44:49.005367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7298): Terminating (SIGTERM)
16:44:49.045302 run iperf3-srv_10.42.42.10(pid=7299): Terminating (SIGTERM)
16:44:49.085304 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7302): Terminating (SIGTERM)
16:44:49.125343 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7305): Terminating (SIGTERM)
16:44:49.165459 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7308): Terminating (SIGTERM)
16:44:49.174793 ---      ParallelTerminationStrategy: PID 7298 died...
16:44:49.228289 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7298): Terminated: ok {rc=0}
16:44:49.237936 ---      ParallelTerminationStrategy: PID 7299 died...
16:44:49.291120 run iperf3-srv_10.42.42.10(pid=7299): Terminated {rc=256}
16:44:49.300735 ---      ParallelTerminationStrategy: PID 7302 died...
16:44:49.354368 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7302): Terminated: ok {rc=0}
16:44:49.364304 ---      ParallelTerminationStrategy: PID 7305 died...
16:44:49.418041 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7305): Terminated: ok {rc=0}
16:44:49.427692 ---      ParallelTerminationStrategy: PID 7308 died...
16:44:49.481005 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7308): Terminated: ok {rc=0}
16:44:49.569494 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7306): Process ended prematurely: osmo-stp_10.42.42.5(pid=7306) [trial-2391↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7306)]