Failed
gprs:oc2g.iperf3.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=2068): Process ended prematurely: osmo-stp_10.42.42.5(pid=2068) [trial-2391↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2068)]
Standard Output
---------------------------------------------- trial-2391 gprs:oc2g iperf3.py ---------------------------------------------- 15:52:08.815611 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:08.827267 tst gprs:oc2g: Using 1 x bts (candidates: 1) 15:52:08.962090 tst iperf3.py: using LAC 34649 15:52:09.093011 tst iperf3.py: using RAC 224 15:52:09.227547 tst iperf3.py: using CellId 34649 15:52:09.357178 tst iperf3.py: using BVCI 34650 15:52:09.382824 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.393855 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.404616 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.415478 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.426724 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.437916 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.449229 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.460232 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 15:52:09.471600 tst gprs:oc2g: Using 1 x modem (candidates: 4) 15:52:09.760551 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 15:52:09.890509 run iperf3-srv_10.42.42.10: Starting iperf3-srv 15:52:10.215021 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2060): Launched 15:52:10.486896 run iperf3-srv_10.42.42.10(pid=2061): Launched 15:52:10.675771 tst iperf3.py:8: start network... 15:52:10.805165 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:52:11.306485 run create_hlr_db(pid=2062): Launched 15:52:11.500914 bus /gobi_6: Setting Powered False 15:52:12.520840 run create_hlr_db(pid=2062): Terminated: ok {rc=0} 15:52:12.968248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2064): Launched 15:52:13.306964 run osmo-hlr_10.42.42.2(pid=2065): Launched 15:52:13.430081 run osmo-stp_10.42.42.5: Starting osmo-stp 15:52:14.014879 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2067): Launched 15:52:14.347442 run osmo-stp_10.42.42.5(pid=2068): Launched 15:52:14.461236 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:52:15.009624 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2070): Launched 15:52:15.120851 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:52:15.394978 run patchelf(pid=2071): Launched 15:52:15.577946 run osmo-stp_10.42.42.5(pid=2068): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2068)] 15:52:15.711194 run osmo-stp_10.42.42.5(pid=2068): stdout: | (launched: 2022-12-13_15:52:14.186019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:52:15.850690 run osmo-stp_10.42.42.5(pid=2068): stderr: | �[0;m�[38;5;43m20221213155214359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155214359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155214360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155214360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:52:15.998715 run osmo-stp_10.42.42.5(pid=2068): stdout: | (launched: 2022-12-13_15:52:14.186019) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:52:16.141748 run osmo-stp_10.42.42.5(pid=2068): stderr: | �[0;m�[38;5;43m20221213155214359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213155214359 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213155214360 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213155214360 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213155214361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:52:16.303232 run patchelf(pid=2071): Terminating (SIGINT) 15:52:16.482959 run patchelf(pid=2071): Terminated: ok {rc=0} 15:52:16.515988 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=2068): Process ended prematurely: osmo-stp_10.42.42.5(pid=2068) [trial-2391↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2068)] [trial-2391↪gprs:oc2g↪iperf3.py:8] 15:52:16.525996 tst iperf3.py:8: Test FAILED (7.7 sec) 15:52:16.587995 run osmo-hlr_10.42.42.2(pid=2065): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:oc2g↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2065)] 15:52:16.638332 run osmo-hlr_10.42.42.2(pid=2065): stdout: | (launched: 2022-12-13_15:52:13.139345) 15:52:16.689139 run osmo-hlr_10.42.42.2(pid=2065): stderr: | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213155213338 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213155213350 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:oc2g/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213155213359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213155213359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213155213359 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:52:16.732243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2060): Terminating (SIGTERM) 15:52:16.774916 run iperf3-srv_10.42.42.10(pid=2061): Terminating (SIGTERM) 15:52:16.816173 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2064): Terminating (SIGTERM) 15:52:16.859126 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2067): Terminating (SIGTERM) 15:52:16.902252 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2070): Terminating (SIGTERM) 15:52:16.911955 --- ParallelTerminationStrategy: PID 2060 died... 15:52:16.966776 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2060): Terminated: ok {rc=0} 15:52:16.976937 --- ParallelTerminationStrategy: PID 2061 died... 15:52:17.030786 run iperf3-srv_10.42.42.10(pid=2061): Terminated {rc=256} 15:52:17.041058 --- ParallelTerminationStrategy: PID 2064 died... 15:52:17.095127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2064): Terminated: ok {rc=0} 15:52:17.105348 --- ParallelTerminationStrategy: PID 2067 died... 15:52:17.159131 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2067): Terminated: ok {rc=0} 15:52:17.169259 --- ParallelTerminationStrategy: PID 2070 died... 15:52:17.222993 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2070): Terminated: ok {rc=0} 15:52:17.306412 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2068): Process ended prematurely: osmo-stp_10.42.42.5(pid=2068) [trial-2391↪gprs:oc2g↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2068)]