Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1542): Process ended prematurely: osmo-stp_10.42.42.5(pid=1542) [trial-2391↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1542)]
Standard Output
---------------------------------------------- trial-2391 gprs:sysmo ping.py ---------------------------------------------- 15:44:36.894956 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:36.907104 tst gprs:sysmo: Using 1 x bts (candidates: 1) 15:44:37.041761 tst ping.py: using LAC 34609 15:44:37.174026 tst ping.py: using RAC 184 15:44:37.305600 tst ping.py: using CellId 34609 15:44:37.437688 tst ping.py: using BVCI 34610 15:44:37.463342 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.474681 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.486093 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.497326 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.508685 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.519982 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.531534 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 15:44:37.543010 tst gprs:sysmo: Using 1 x modem (candidates: 4) 15:44:37.844495 tst ping.py:19: start network... 15:44:37.983174 run osmo-hlr_10.42.42.2: Starting osmo-hlr 15:44:38.515150 run create_hlr_db(pid=1536): Launched 15:44:38.707892 bus /gobi_6: Setting Powered False 15:44:39.728191 run create_hlr_db(pid=1536): Terminated: ok {rc=0} 15:44:40.149435 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1538): Launched 15:44:40.462109 run osmo-hlr_10.42.42.2(pid=1539): Launched 15:44:40.577059 run osmo-stp_10.42.42.5: Starting osmo-stp 15:44:41.117588 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1541): Launched 15:44:41.429312 run osmo-stp_10.42.42.5(pid=1542): Launched 15:44:41.541889 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 15:44:42.085147 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1544): Launched 15:44:42.195744 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 15:44:42.470287 run patchelf(pid=1545): Launched 15:44:42.652615 run osmo-stp_10.42.42.5(pid=1542): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1542)] 15:44:42.786292 run osmo-stp_10.42.42.5(pid=1542): stdout: | (launched: 2022-12-13_15:44:41.274938) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:44:42.920920 run osmo-stp_10.42.42.5(pid=1542): stderr: | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154441447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:44:43.049417 run osmo-stp_10.42.42.5(pid=1542): stdout: | (launched: 2022-12-13_15:44:41.274938) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 15:44:43.176813 run osmo-stp_10.42.42.5(pid=1542): stderr: | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213154441446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213154441447 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213154441449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 15:44:43.325439 run patchelf(pid=1545): Terminating (SIGINT) 15:44:43.499426 run patchelf(pid=1545): Terminated: ok {rc=0} 15:44:43.530866 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=1542): Process ended prematurely: osmo-stp_10.42.42.5(pid=1542) [trial-2391↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1542)] [trial-2391↪gprs:sysmo↪ping.py:22] 15:44:43.539513 tst ping.py:22: Test FAILED (6.6 sec) 15:44:43.600871 run osmo-hlr_10.42.42.2(pid=1539): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1539)] 15:44:43.651256 run osmo-hlr_10.42.42.2(pid=1539): stdout: | (launched: 2022-12-13_15:44:40.306972) 15:44:43.701651 run osmo-hlr_10.42.42.2(pid=1539): stderr: | �[0;m�[1;31m20221213154440489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213154440489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213154440489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213154440489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213154440489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213154440490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213154440501 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213154440510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213154440511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213154440511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 15:44:43.745024 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1538): Terminating (SIGTERM) 15:44:43.786701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1541): Terminating (SIGTERM) 15:44:43.827569 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1544): Terminating (SIGTERM) 15:44:43.836909 --- ParallelTerminationStrategy: PID 1538 died... 15:44:43.891663 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1538): Terminated: ok {rc=0} 15:44:43.901793 --- ParallelTerminationStrategy: PID 1541 died... 15:44:43.956445 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1541): Terminated: ok {rc=0} 15:44:43.966208 --- ParallelTerminationStrategy: PID 1544 died... 15:44:44.020762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1544): Terminated: ok {rc=0} 15:44:44.110666 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1542): Process ended prematurely: osmo-stp_10.42.42.5(pid=1542) [trial-2391↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1542)]