Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3715): Process ended prematurely: osmo-stp_10.42.42.5(pid=3715) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3715)]
Standard Output
---------------------------------------------- trial-2391 gprs:trx-b200+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 16:04:29.727591 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:29.739975 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 16:04:29.911139 tst ping.py: using LAC 34712 16:04:30.042273 tst ping.py: using RAC 32 16:04:30.173601 tst ping.py: using CellId 34712 16:04:30.304656 tst ping.py: using BVCI 34713 16:04:30.330285 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.341908 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.353302 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.364663 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.376854 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.388491 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.400373 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 16:04:30.412029 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 16:04:30.696021 tst ping.py:19: start network... 16:04:30.824194 run osmo-hlr_10.42.42.2: Starting osmo-hlr 16:04:31.424049 run create_hlr_db(pid=3709): Launched 16:04:31.606613 bus /gobi_6: Setting Powered False 16:04:32.623003 run create_hlr_db(pid=3709): Terminated: ok {rc=0} 16:04:33.037861 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3711): Launched 16:04:33.350411 run osmo-hlr_10.42.42.2(pid=3712): Launched 16:04:33.467777 run osmo-stp_10.42.42.5: Starting osmo-stp 16:04:34.054008 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3714): Launched 16:04:34.387192 run osmo-stp_10.42.42.5(pid=3715): Launched 16:04:34.507705 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 16:04:35.085235 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3717): Launched 16:04:35.205217 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 16:04:35.480395 run patchelf(pid=3718): Launched 16:04:35.660881 run osmo-stp_10.42.42.5(pid=3715): ERR: Terminated: ERROR {rc=1} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3715)] 16:04:35.793261 run osmo-stp_10.42.42.5(pid=3715): stdout: | (launched: 2022-12-13_16:04:34.222236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:04:35.925977 run osmo-stp_10.42.42.5(pid=3715): stderr: | �[0;m�[38;5;43m20221213160434416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160434417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160434417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160434417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:04:36.053398 run osmo-stp_10.42.42.5(pid=3715): stdout: | (launched: 2022-12-13_16:04:34.222236) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 16:04:36.179341 run osmo-stp_10.42.42.5(pid=3715): stderr: | �[0;m�[38;5;43m20221213160434416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213160434417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213160434417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213160434417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213160434418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 16:04:36.326563 run patchelf(pid=3718): Terminating (SIGINT) 16:04:36.499881 run patchelf(pid=3718): Terminated: ok {rc=0} 16:04:36.531238 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=3715): Process ended prematurely: osmo-stp_10.42.42.5(pid=3715) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3715)] [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22] 16:04:36.540066 tst ping.py:22: Test FAILED (6.8 sec) 16:04:36.600748 run osmo-hlr_10.42.42.2(pid=3712): ERR: Terminated: ERROR {rc=237} [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3712)] 16:04:36.650351 run osmo-hlr_10.42.42.2(pid=3712): stdout: | (launched: 2022-12-13_16:04:33.194904) 16:04:36.700636 run osmo-hlr_10.42.42.2(pid=3712): stderr: | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213160433372 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213160433386 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2391/run.2022-12-13_15-37-59/gprs:trx-b200+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213160433394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213160433394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213160433394 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 16:04:36.743461 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3711): Terminating (SIGTERM) 16:04:36.784068 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3714): Terminating (SIGTERM) 16:04:36.824528 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3717): Terminating (SIGTERM) 16:04:36.833970 --- ParallelTerminationStrategy: PID 3711 died... 16:04:36.887924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3711): Terminated: ok {rc=0} 16:04:36.897968 --- ParallelTerminationStrategy: PID 3714 died... 16:04:36.952179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3714): Terminated: ok {rc=0} 16:04:36.961906 --- ParallelTerminationStrategy: PID 3717 died... 16:04:37.020335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3717): Terminated: ok {rc=0} 16:04:37.107156 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3715): Process ended prematurely: osmo-stp_10.42.42.5(pid=3715) [trial-2391↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3715)]