Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=16334): Process ended prematurely: osmo-stp_10.42.42.5(pid=16334) [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16334)]
Standard Output
---------------------------------------------- trial-2392 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 18:22:14.493860 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:14.506077 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:22:14.646278 tst ping.py: using LAC 35414 18:22:14.767999 tst ping.py: using RAC 224 18:22:14.890026 tst ping.py: using CellId 35414 18:22:15.012280 tst ping.py: using BVCI 35415 18:22:15.035742 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.046969 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.057895 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.068725 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.079469 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.090229 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.101510 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:22:15.112180 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:22:15.409907 tst ping.py:19: start network... 18:22:15.546372 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:22:16.108596 run create_hlr_db(pid=16328): Launched 18:22:16.302506 bus /gobi_6: Setting Powered False 18:22:17.323893 run create_hlr_db(pid=16328): Terminated: ok {rc=0} 18:22:17.740756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16330): Launched 18:22:18.048114 run osmo-hlr_10.42.42.2(pid=16331): Launched 18:22:18.170208 run osmo-stp_10.42.42.5: Starting osmo-stp 18:22:18.711442 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16333): Launched 18:22:19.021501 run osmo-stp_10.42.42.5(pid=16334): Launched 18:22:19.133668 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:22:19.668897 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16336): Launched 18:22:19.777393 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:22:20.046878 run patchelf(pid=16337): Launched 18:22:20.225970 run osmo-stp_10.42.42.5(pid=16334): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16334)] 18:22:20.357286 run osmo-stp_10.42.42.5(pid=16334): stdout: | (launched: 2022-12-13_18:22:18.867658) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:20.489993 run osmo-stp_10.42.42.5(pid=16334): stderr: | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182219040 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:20.616664 run osmo-stp_10.42.42.5(pid=16334): stdout: | (launched: 2022-12-13_18:22:18.867658) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:22:20.741842 run osmo-stp_10.42.42.5(pid=16334): stderr: | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213182219039 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213182219040 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213182219040 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:22:20.889650 run patchelf(pid=16337): Terminating (SIGINT) 18:22:21.063551 run patchelf(pid=16337): Terminated: ok {rc=0} 18:22:21.094881 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=16334): Process ended prematurely: osmo-stp_10.42.42.5(pid=16334) [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16334)] [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 18:22:21.103722 tst ping.py:22: Test FAILED (6.6 sec) 18:22:21.164558 run osmo-hlr_10.42.42.2(pid=16331): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16331)] 18:22:21.214051 run osmo-hlr_10.42.42.2(pid=16331): stdout: | (launched: 2022-12-13_18:22:17.895940) 18:22:21.264116 run osmo-hlr_10.42.42.2(pid=16331): stderr: | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213182218071 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213182218083 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213182218092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213182218092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213182218092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:22:21.306704 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16330): Terminating (SIGTERM) 18:22:21.346706 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16333): Terminating (SIGTERM) 18:22:21.386663 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16336): Terminating (SIGTERM) 18:22:21.396043 --- ParallelTerminationStrategy: PID 16330 died... 18:22:21.449769 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16330): Terminated: ok {rc=0} 18:22:21.459536 --- ParallelTerminationStrategy: PID 16333 died... 18:22:21.513072 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16333): Terminated: ok {rc=0} 18:22:21.522822 --- ParallelTerminationStrategy: PID 16336 died... 18:22:21.576282 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16336): Terminated: ok {rc=0} 18:22:21.661467 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16334): Process ended prematurely: osmo-stp_10.42.42.5(pid=16334) [trial-2392↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16334)]