Failed
gprs:oc2g+mod-bts0-egprs.ping.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=10505): Process ended prematurely: osmo-stp_10.42.42.5(pid=10505) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10505)]
Standard Output
---------------------------------------------- trial-2392 gprs:oc2g+mod-bts0-egprs ping.py ---------------------------------------------- 17:25:45.905597 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:45.917698 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:25:46.064225 tst ping.py: using LAC 35117 17:25:46.193231 tst ping.py: using RAC 182 17:25:46.320456 tst ping.py: using CellId 35117 17:25:46.470570 tst ping.py: using BVCI 35118 17:25:46.498333 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.511169 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.523747 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.536322 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.549691 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.564569 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.580850 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:25:46.594411 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:25:46.943608 tst ping.py:19: start network... 17:25:47.108024 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:25:47.614032 run create_hlr_db(pid=10499): Launched 17:25:47.802843 bus /gobi_6: Setting Powered False 17:25:48.823009 run create_hlr_db(pid=10499): Terminated: ok {rc=0} 17:25:49.228901 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10501): Launched 17:25:49.529537 run osmo-hlr_10.42.42.2(pid=10502): Launched 17:25:49.644684 run osmo-stp_10.42.42.5: Starting osmo-stp 17:25:50.170598 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10504): Launched 17:25:50.472401 run osmo-stp_10.42.42.5(pid=10505): Launched 17:25:50.582100 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:25:51.108617 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10507): Launched 17:25:51.216035 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:25:51.479177 run patchelf(pid=10508): Launched 17:25:51.656537 run osmo-stp_10.42.42.5(pid=10505): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10505)] 17:25:51.786667 run osmo-stp_10.42.42.5(pid=10505): stdout: | (launched: 2022-12-13_17:25:50.324577) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:51.917780 run osmo-stp_10.42.42.5(pid=10505): stderr: | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172550494 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:52.044111 run osmo-stp_10.42.42.5(pid=10505): stdout: | (launched: 2022-12-13_17:25:50.324577) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:25:52.168277 run osmo-stp_10.42.42.5(pid=10505): stderr: | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213172550493 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213172550494 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213172550494 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:25:52.314707 run patchelf(pid=10508): Terminating (SIGINT) 17:25:52.486777 run patchelf(pid=10508): Terminated: ok {rc=0} 17:25:52.517908 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10505): Process ended prematurely: osmo-stp_10.42.42.5(pid=10505) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10505)] [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py:22] 17:25:52.526532 tst ping.py:22: Test FAILED (6.6 sec) 17:25:52.587930 run osmo-hlr_10.42.42.2(pid=10502): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10502)] 17:25:52.637948 run osmo-hlr_10.42.42.2(pid=10502): stdout: | (launched: 2022-12-13_17:25:49.382454) 17:25:52.688552 run osmo-hlr_10.42.42.2(pid=10502): stderr: | �[0;m�[1;31m20221213172549554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213172549554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213172549554 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213172549555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213172549555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213172549555 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213172549567 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:oc2g+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213172549576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213172549577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213172549577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:25:52.731468 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10501): Terminating (SIGTERM) 17:25:52.772009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10504): Terminating (SIGTERM) 17:25:52.812614 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10507): Terminating (SIGTERM) 17:25:52.821960 --- ParallelTerminationStrategy: PID 10501 died... 17:25:52.876356 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10501): Terminated: ok {rc=0} 17:25:52.886182 --- ParallelTerminationStrategy: PID 10504 died... 17:25:52.940096 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10504): Terminated: ok {rc=0} 17:25:52.949828 --- ParallelTerminationStrategy: PID 10507 died... 17:25:53.003689 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10507): Terminated: ok {rc=0} 17:25:53.089028 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10505): Process ended prematurely: osmo-stp_10.42.42.5(pid=10505) [trial-2392↪gprs:oc2g+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10505)]