Failed
gprs:trx-b200+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=11232): Process ended prematurely: osmo-stp_10.42.42.5(pid=11232) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11232)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-b200+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 17:35:59.035376 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.047637 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 17:35:59.220569 tst iperf3.py: using LAC 35171 17:35:59.352357 tst iperf3.py: using RAC 236 17:35:59.481197 tst iperf3.py: using CellId 35171 17:35:59.616394 tst iperf3.py: using BVCI 35172 17:35:59.641791 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.653244 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.664666 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.676083 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.687721 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.699314 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.710949 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.722733 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 17:35:59.734736 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 17:36:00.022381 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 17:36:00.152263 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:36:00.476126 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11224): Launched 17:36:00.747483 run iperf3-srv_10.42.42.10(pid=11225): Launched 17:36:00.941361 tst iperf3.py:8: start network... 17:36:01.073563 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:36:01.613067 run create_hlr_db(pid=11226): Launched 17:36:01.812065 bus /gobi_6: Setting Powered False 17:36:02.816026 run create_hlr_db(pid=11226): Terminated: ok {rc=0} 17:36:03.278489 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11228): Launched 17:36:03.612526 run osmo-hlr_10.42.42.2(pid=11229): Launched 17:36:03.736452 run osmo-stp_10.42.42.5: Starting osmo-stp 17:36:04.319381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11231): Launched 17:36:04.650878 run osmo-stp_10.42.42.5(pid=11232): Launched 17:36:04.771295 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:36:05.351891 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11234): Launched 17:36:05.471454 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:36:05.762225 run patchelf(pid=11235): Launched 17:36:05.957504 run osmo-stp_10.42.42.5(pid=11232): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11232)] 17:36:06.100616 run osmo-stp_10.42.42.5(pid=11232): stdout: | (launched: 2022-12-13_17:36:04.487688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:06.244261 run osmo-stp_10.42.42.5(pid=11232): stderr: | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173604678 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:06.382095 run osmo-stp_10.42.42.5(pid=11232): stdout: | (launched: 2022-12-13_17:36:04.487688) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:36:06.518397 run osmo-stp_10.42.42.5(pid=11232): stderr: | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213173604677 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213173604678 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213173604678 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:36:06.678842 run patchelf(pid=11235): Terminating (SIGINT) 17:36:06.868170 run patchelf(pid=11235): Terminated: ok {rc=0} 17:36:06.902658 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=11232): Process ended prematurely: osmo-stp_10.42.42.5(pid=11232) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11232)] [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8] 17:36:06.912691 tst iperf3.py:8: Test FAILED (7.9 sec) 17:36:06.977311 run osmo-hlr_10.42.42.2(pid=11229): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11229)] 17:36:07.029852 run osmo-hlr_10.42.42.2(pid=11229): stdout: | (launched: 2022-12-13_17:36:03.447961) 17:36:07.083012 run osmo-hlr_10.42.42.2(pid=11229): stderr: | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213173603643 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213173603655 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-b200+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213173603664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213173603664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213173603664 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:36:07.129060 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11224): Terminating (SIGTERM) 17:36:07.172249 run iperf3-srv_10.42.42.10(pid=11225): Terminating (SIGTERM) 17:36:07.215800 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11228): Terminating (SIGTERM) 17:36:07.259104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11231): Terminating (SIGTERM) 17:36:07.302284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11234): Terminating (SIGTERM) 17:36:07.312257 --- ParallelTerminationStrategy: PID 11224 died... 17:36:07.370112 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11224): Terminated: ok {rc=0} 17:36:07.380261 --- ParallelTerminationStrategy: PID 11225 died... 17:36:07.437933 run iperf3-srv_10.42.42.10(pid=11225): Terminated {rc=256} 17:36:07.448199 --- ParallelTerminationStrategy: PID 11228 died... 17:36:07.505669 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11228): Terminated: ok {rc=0} 17:36:07.516025 --- ParallelTerminationStrategy: PID 11231 died... 17:36:07.573285 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11231): Terminated: ok {rc=0} 17:36:07.583600 --- ParallelTerminationStrategy: PID 11234 died... 17:36:07.640887 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11234): Terminated: ok {rc=0} 17:36:07.729969 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11232): Process ended prematurely: osmo-stp_10.42.42.5(pid=11232) [trial-2392↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11232)]