Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=14497): Process ended prematurely: osmo-stp_10.42.42.5(pid=14497) [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14497)]
Standard Output
---------------------------------------------- trial-2392 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 18:07:11.334894 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.346309 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 18:07:11.488900 tst iperf3.py: using LAC 35336 18:07:11.609681 tst iperf3.py: using RAC 146 18:07:11.730993 tst iperf3.py: using CellId 35336 18:07:11.854346 tst iperf3.py: using BVCI 35337 18:07:11.877988 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.888747 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.899282 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.909841 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.921093 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.932188 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.943485 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.954526 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 18:07:11.965724 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 18:07:12.268240 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:07:12.407349 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:07:12.754562 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14489): Launched 18:07:13.042801 run iperf3-srv_10.42.42.10(pid=14490): Launched 18:07:13.247695 tst iperf3.py:8: start network... 18:07:13.386671 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:07:13.912411 run create_hlr_db(pid=14491): Launched 18:07:14.104648 bus /gobi_6: Setting Powered False 18:07:15.114311 run create_hlr_db(pid=14491): Terminated: ok {rc=0} 18:07:15.539691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14493): Launched 18:07:15.910635 run osmo-hlr_10.42.42.2(pid=14494): Launched 18:07:16.068532 run osmo-stp_10.42.42.5: Starting osmo-stp 18:07:16.722709 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14496): Launched 18:07:17.170951 run osmo-stp_10.42.42.5(pid=14497): Launched 18:07:17.368149 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:07:17.912566 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14499): Launched 18:07:18.022665 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:07:18.295928 run patchelf(pid=14500): Launched 18:07:18.478018 run osmo-stp_10.42.42.5(pid=14497): ERR: Terminated: ERROR {rc=1} [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14497)] 18:07:18.610575 run osmo-stp_10.42.42.5(pid=14497): stdout: | (launched: 2022-12-13_18:07:16.896883) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:07:18.743204 run osmo-stp_10.42.42.5(pid=14497): stderr: | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180717197 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:07:18.871186 run osmo-stp_10.42.42.5(pid=14497): stdout: | (launched: 2022-12-13_18:07:16.896883) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:07:18.997866 run osmo-stp_10.42.42.5(pid=14497): stderr: | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213180717196 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213180717197 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213180717197 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:07:19.147015 run patchelf(pid=14500): Terminating (SIGINT) 18:07:19.323158 run patchelf(pid=14500): Terminated: ok {rc=0} 18:07:19.355227 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14497): Process ended prematurely: osmo-stp_10.42.42.5(pid=14497) [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14497)] [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 18:07:19.364423 tst iperf3.py:8: Test FAILED (8.1 sec) 18:07:19.425118 run osmo-hlr_10.42.42.2(pid=14494): ERR: Terminated: ERROR {rc=237} [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14494)] 18:07:19.475139 run osmo-hlr_10.42.42.2(pid=14494): stdout: | (launched: 2022-12-13_18:07:15.698285) 18:07:19.525229 run osmo-hlr_10.42.42.2(pid=14494): stderr: | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213180715876 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213180715889 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2392/run.2022-12-13_17-10-08/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213180715905 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213180715906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213180715906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:07:19.567695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14489): Terminating (SIGTERM) 18:07:19.607581 run iperf3-srv_10.42.42.10(pid=14490): Terminating (SIGTERM) 18:07:19.647529 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14493): Terminating (SIGTERM) 18:07:19.687525 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14496): Terminating (SIGTERM) 18:07:19.728042 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14499): Terminating (SIGTERM) 18:07:19.737348 --- ParallelTerminationStrategy: PID 14489 died... 18:07:19.791600 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14489): Terminated: ok {rc=0} 18:07:19.801580 --- ParallelTerminationStrategy: PID 14490 died... 18:07:19.855539 run iperf3-srv_10.42.42.10(pid=14490): Terminated {rc=256} 18:07:19.865500 --- ParallelTerminationStrategy: PID 14493 died... 18:07:19.919527 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14493): Terminated: ok {rc=0} 18:07:19.929547 --- ParallelTerminationStrategy: PID 14496 died... 18:07:19.983063 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14496): Terminated: ok {rc=0} 18:07:19.993067 --- ParallelTerminationStrategy: PID 14499 died... 18:07:20.046628 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14499): Terminated: ok {rc=0} 18:07:20.136030 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14497): Process ended prematurely: osmo-stp_10.42.42.5(pid=14497) [trial-2392↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14497)]