Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24357): Process ended prematurely: osmo-stp_10.42.42.5(pid=24357) [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24357)]
Standard Output
---------------------------------------------- trial-2393 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 19:49:55.798130 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:55.810291 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:49:55.954136 tst ping.py: using LAC 35875 19:49:56.079693 tst ping.py: using RAC 175 19:49:56.205831 tst ping.py: using CellId 35875 19:49:56.331671 tst ping.py: using BVCI 35876 19:49:56.355955 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.367567 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.379015 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.390412 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.402074 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.413683 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.425502 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:49:56.437175 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:49:56.724882 tst ping.py:19: start network... 19:49:56.856330 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:49:57.353898 run create_hlr_db(pid=24351): Launched 19:49:57.536759 bus /gobi_6: Setting Powered False 19:49:58.558373 run create_hlr_db(pid=24351): Terminated: ok {rc=0} 19:49:58.979824 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24353): Launched 19:49:59.297409 run osmo-hlr_10.42.42.2(pid=24354): Launched 19:49:59.417229 run osmo-stp_10.42.42.5: Starting osmo-stp 19:49:59.969951 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24356): Launched 19:50:00.287579 run osmo-stp_10.42.42.5(pid=24357): Launched 19:50:00.402514 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:50:00.965561 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24359): Launched 19:50:01.089724 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:50:01.371949 run patchelf(pid=24363): Launched 19:50:01.551995 run osmo-stp_10.42.42.5(pid=24357): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24357)] 19:50:01.685840 run osmo-stp_10.42.42.5(pid=24357): stdout: | (launched: 2022-12-13_19:50:00.130928) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:01.819878 run osmo-stp_10.42.42.5(pid=24357): stderr: | �[0;m�[38;5;43m20221213195000319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195000320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195000320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195000320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:01.946056 run osmo-stp_10.42.42.5(pid=24357): stdout: | (launched: 2022-12-13_19:50:00.130928) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:50:02.074188 run osmo-stp_10.42.42.5(pid=24357): stderr: | �[0;m�[38;5;43m20221213195000319 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213195000320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213195000320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213195000320 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213195000321 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:50:02.221350 run patchelf(pid=24363): Terminating (SIGINT) 19:50:02.387679 run patchelf(pid=24363): Terminated: ok {rc=0} 19:50:02.418216 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24357): Process ended prematurely: osmo-stp_10.42.42.5(pid=24357) [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24357)] [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 19:50:02.426897 tst ping.py:22: Test FAILED (6.6 sec) 19:50:02.487307 run osmo-hlr_10.42.42.2(pid=24354): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24354)] 19:50:02.536359 run osmo-hlr_10.42.42.2(pid=24354): stdout: | (launched: 2022-12-13_19:49:59.140519) 19:50:02.586260 run osmo-hlr_10.42.42.2(pid=24354): stderr: | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213194959335 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213194959348 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213194959356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213194959356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213194959356 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:50:02.629276 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24353): Terminating (SIGTERM) 19:50:02.669408 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24356): Terminating (SIGTERM) 19:50:02.709943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24359): Terminating (SIGTERM) 19:50:02.719329 --- ParallelTerminationStrategy: PID 24353 died... 19:50:02.772847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24353): Terminated: ok {rc=0} 19:50:02.782725 --- ParallelTerminationStrategy: PID 24356 died... 19:50:02.836262 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24356): Terminated: ok {rc=0} 19:50:02.846161 --- ParallelTerminationStrategy: PID 24359 died... 19:50:02.899740 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24359): Terminated: ok {rc=0} 19:50:02.987943 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24357): Process ended prematurely: osmo-stp_10.42.42.5(pid=24357) [trial-2393↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24357)]