Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=19670): Process ended prematurely: osmo-stp_10.42.42.5(pid=19670) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19670)]
Standard Output
---------------------------------------------- trial-2393 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 18:54:34.408452 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:34.420080 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:54:34.570557 tst iperf3.py: using LAC 35581 18:54:34.688410 tst iperf3.py: using RAC 136 18:54:34.808143 tst iperf3.py: using CellId 35581 18:54:34.927473 tst iperf3.py: using BVCI 35582 18:54:34.950865 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:34.961787 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:34.972322 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:34.982924 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:34.993521 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:35.004188 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:35.015181 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:35.026282 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:54:35.037125 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:54:35.314440 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:54:35.440685 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:54:35.755806 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19662): Launched 18:54:36.020315 run iperf3-srv_10.42.42.10(pid=19663): Launched 18:54:36.206216 tst iperf3.py:8: start network... 18:54:36.333333 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:54:36.820654 run create_hlr_db(pid=19664): Launched 18:54:36.994993 bus /gobi_6: Setting Powered False 18:54:38.016114 run create_hlr_db(pid=19664): Terminated: ok {rc=0} 18:54:38.451613 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19666): Launched 18:54:38.779219 run osmo-hlr_10.42.42.2(pid=19667): Launched 18:54:38.903292 run osmo-stp_10.42.42.5: Starting osmo-stp 18:54:39.472305 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19669): Launched 18:54:39.801016 run osmo-stp_10.42.42.5(pid=19670): Launched 18:54:39.918099 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:54:40.485687 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19672): Launched 18:54:40.602991 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:54:40.887975 run patchelf(pid=19673): Launched 18:54:41.078978 run osmo-stp_10.42.42.5(pid=19670): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19670)] 18:54:41.218852 run osmo-stp_10.42.42.5(pid=19670): stdout: | (launched: 2022-12-13_18:54:39.639259) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:41.359341 run osmo-stp_10.42.42.5(pid=19670): stderr: | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185439829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:41.494907 run osmo-stp_10.42.42.5(pid=19670): stdout: | (launched: 2022-12-13_18:54:39.639259) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:54:41.629777 run osmo-stp_10.42.42.5(pid=19670): stderr: | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213185439829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213185439829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213185439830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:54:41.785919 run patchelf(pid=19673): Terminating (SIGINT) 18:54:41.968797 run patchelf(pid=19673): Terminated: ok {rc=0} 18:54:42.002584 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=19670): Process ended prematurely: osmo-stp_10.42.42.5(pid=19670) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19670)] [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 18:54:42.012610 tst iperf3.py:8: Test FAILED (7.6 sec) 18:54:42.076867 run osmo-hlr_10.42.42.2(pid=19667): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19667)] 18:54:42.129496 run osmo-hlr_10.42.42.2(pid=19667): stdout: | (launched: 2022-12-13_18:54:38.618409) 18:54:42.182410 run osmo-hlr_10.42.42.2(pid=19667): stderr: | �[0;m�[1;31m20221213185438813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213185438813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213185438813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213185438813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213185438813 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213185438814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213185438825 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213185438834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213185438834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213185438834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:54:42.227734 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19662): Terminating (SIGTERM) 18:54:42.270402 run iperf3-srv_10.42.42.10(pid=19663): Terminating (SIGTERM) 18:54:42.313144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19666): Terminating (SIGTERM) 18:54:42.355702 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19669): Terminating (SIGTERM) 18:54:42.398287 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19672): Terminating (SIGTERM) 18:54:42.408009 --- ParallelTerminationStrategy: PID 19662 died... 18:54:42.464887 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19662): Terminated: ok {rc=0} 18:54:42.475104 --- ParallelTerminationStrategy: PID 19663 died... 18:54:42.532183 run iperf3-srv_10.42.42.10(pid=19663): Terminated {rc=256} 18:54:42.542338 --- ParallelTerminationStrategy: PID 19666 died... 18:54:42.599044 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19666): Terminated: ok {rc=0} 18:54:42.609144 --- ParallelTerminationStrategy: PID 19669 died... 18:54:42.665607 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19669): Terminated: ok {rc=0} 18:54:42.675777 --- ParallelTerminationStrategy: PID 19672 died... 18:54:42.732294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19672): Terminated: ok {rc=0} 18:54:42.819357 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19670): Process ended prematurely: osmo-stp_10.42.42.5(pid=19670) [trial-2393↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19670)]