Failed
gprs:sysmo+mod-bts0-dynts-ipa.iperf3.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18851): Process ended prematurely: osmo-stp_10.42.42.5(pid=18851) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18851)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 18:46:37.973191 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:37.985193 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 18:46:38.153209 tst iperf3.py: using LAC 35539 18:46:38.294263 tst iperf3.py: using RAC 94 18:46:38.422547 tst iperf3.py: using CellId 35539 18:46:38.555276 tst iperf3.py: using BVCI 35540 18:46:38.580476 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.591965 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.603275 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.614484 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.625905 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.637638 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.649329 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.660599 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 18:46:38.672272 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 18:46:38.951820 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 18:46:39.079274 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:46:39.395804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18843): Launched 18:46:39.659357 run iperf3-srv_10.42.42.10(pid=18844): Launched 18:46:39.845965 tst iperf3.py:8: start network... 18:46:39.972927 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:46:40.462146 run create_hlr_db(pid=18845): Launched 18:46:40.637438 bus /gobi_6: Setting Powered False 18:46:41.659322 run create_hlr_db(pid=18845): Terminated: ok {rc=0} 18:46:42.096568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18847): Launched 18:46:42.426499 run osmo-hlr_10.42.42.2(pid=18848): Launched 18:46:42.546820 run osmo-stp_10.42.42.5: Starting osmo-stp 18:46:43.118660 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18850): Launched 18:46:43.447680 run osmo-stp_10.42.42.5(pid=18851): Launched 18:46:43.567173 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:46:44.138809 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18853): Launched 18:46:44.256431 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:46:44.543313 run patchelf(pid=18854): Launched 18:46:44.735140 run osmo-stp_10.42.42.5(pid=18851): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18851)] 18:46:44.875723 run osmo-stp_10.42.42.5(pid=18851): stdout: | (launched: 2022-12-13_18:46:43.286175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:45.016253 run osmo-stp_10.42.42.5(pid=18851): stderr: | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184643478 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:45.152477 run osmo-stp_10.42.42.5(pid=18851): stdout: | (launched: 2022-12-13_18:46:43.286175) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:46:45.287648 run osmo-stp_10.42.42.5(pid=18851): stderr: | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184643477 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184643478 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184643478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:46:45.444511 run patchelf(pid=18854): Terminating (SIGINT) 18:46:45.628291 run patchelf(pid=18854): Terminated: ok {rc=0} 18:46:45.662012 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18851): Process ended prematurely: osmo-stp_10.42.42.5(pid=18851) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18851)] [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8] 18:46:45.671899 tst iperf3.py:8: Test FAILED (7.7 sec) 18:46:45.735960 run osmo-hlr_10.42.42.2(pid=18848): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18848)] 18:46:45.787926 run osmo-hlr_10.42.42.2(pid=18848): stdout: | (launched: 2022-12-13_18:46:42.263935) 18:46:45.852802 run osmo-hlr_10.42.42.2(pid=18848): stderr: | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184642463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184642476 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184642484 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184642485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184642485 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:46:45.899281 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18843): Terminating (SIGTERM) 18:46:45.940374 run iperf3-srv_10.42.42.10(pid=18844): Terminating (SIGTERM) 18:46:45.981428 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18847): Terminating (SIGTERM) 18:46:46.025656 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18850): Terminating (SIGTERM) 18:46:46.069999 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18853): Terminating (SIGTERM) 18:46:46.080678 --- ParallelTerminationStrategy: PID 18843 died... 18:46:46.141287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18843): Terminated: ok {rc=0} 18:46:46.152079 --- ParallelTerminationStrategy: PID 18844 died... 18:46:46.207977 run iperf3-srv_10.42.42.10(pid=18844): Terminated {rc=256} 18:46:46.218096 --- ParallelTerminationStrategy: PID 18847 died... 18:46:46.273389 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18847): Terminated: ok {rc=0} 18:46:46.284072 --- ParallelTerminationStrategy: PID 18850 died... 18:46:46.340411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18850): Terminated: ok {rc=0} 18:46:46.351056 --- ParallelTerminationStrategy: PID 18853 died... 18:46:46.405995 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18853): Terminated: ok {rc=0} 18:46:46.493696 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18851): Process ended prematurely: osmo-stp_10.42.42.5(pid=18851) [trial-2393↪gprs:sysmo+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18851)]