Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18947): Process ended prematurely: osmo-stp_10.42.42.5(pid=18947) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18947)]
Standard Output
---------------------------------------------- trial-2393 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 18:48:08.292038 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.304141 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 18:48:08.458494 tst ping.py: using LAC 35546 18:48:08.583824 tst ping.py: using RAC 101 18:48:08.709460 tst ping.py: using CellId 35546 18:48:08.834968 tst ping.py: using BVCI 35547 18:48:08.859619 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.871237 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.882528 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.893802 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.905316 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.916720 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.928504 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 18:48:08.940079 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 18:48:09.218607 tst ping.py:19: start network... 18:48:09.343824 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:48:09.825830 run create_hlr_db(pid=18941): Launched 18:48:09.999069 bus /gobi_6: Setting Powered False 18:48:11.021234 run create_hlr_db(pid=18941): Terminated: ok {rc=0} 18:48:11.451952 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18943): Launched 18:48:11.775781 run osmo-hlr_10.42.42.2(pid=18944): Launched 18:48:11.895638 run osmo-stp_10.42.42.5: Starting osmo-stp 18:48:12.460311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18946): Launched 18:48:12.783998 run osmo-stp_10.42.42.5(pid=18947): Launched 18:48:12.901269 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:48:13.464618 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18949): Launched 18:48:13.579826 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:48:13.860713 run patchelf(pid=18950): Launched 18:48:14.050069 run osmo-stp_10.42.42.5(pid=18947): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18947)] 18:48:14.188327 run osmo-stp_10.42.42.5(pid=18947): stdout: | (launched: 2022-12-13_18:48:12.624671) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:48:14.327127 run osmo-stp_10.42.42.5(pid=18947): stderr: | �[0;m�[38;5;43m20221213184812815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184812815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184812816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184812816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:48:14.461613 run osmo-stp_10.42.42.5(pid=18947): stdout: | (launched: 2022-12-13_18:48:12.624671) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:48:14.594529 run osmo-stp_10.42.42.5(pid=18947): stderr: | �[0;m�[38;5;43m20221213184812815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213184812815 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213184812816 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213184812816 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213184812817 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:48:14.748279 run patchelf(pid=18950): Terminating (SIGINT) 18:48:14.929089 run patchelf(pid=18950): Terminated: ok {rc=0} 18:48:14.961838 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18947): Process ended prematurely: osmo-stp_10.42.42.5(pid=18947) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18947)] [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 18:48:14.971214 tst ping.py:22: Test FAILED (6.7 sec) 18:48:15.035580 run osmo-hlr_10.42.42.2(pid=18944): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18944)] 18:48:15.088067 run osmo-hlr_10.42.42.2(pid=18944): stdout: | (launched: 2022-12-13_18:48:11.617361) 18:48:15.140937 run osmo-hlr_10.42.42.2(pid=18944): stderr: | �[0;m�[1;31m20221213184811814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213184811814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213184811814 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213184811815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213184811815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213184811815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213184811827 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213184811835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213184811836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213184811836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:48:15.186463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18943): Terminating (SIGTERM) 18:48:15.229358 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18946): Terminating (SIGTERM) 18:48:15.271960 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18949): Terminating (SIGTERM) 18:48:15.281822 --- ParallelTerminationStrategy: PID 18943 died... 18:48:15.339679 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18943): Terminated: ok {rc=0} 18:48:15.349997 --- ParallelTerminationStrategy: PID 18946 died... 18:48:15.407171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18946): Terminated: ok {rc=0} 18:48:15.417395 --- ParallelTerminationStrategy: PID 18949 died... 18:48:15.474386 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18949): Terminated: ok {rc=0} 18:48:15.561546 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18947): Process ended prematurely: osmo-stp_10.42.42.5(pid=18947) [trial-2393↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18947)]