Failed
gprs:trx-lms+mod-bts0-egprs.iperf3.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=22573): Process ended prematurely: osmo-stp_10.42.42.5(pid=22573) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22573)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-lms+mod-bts0-egprs iperf3.py ---------------------------------------------- 19:28:18.259837 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.271706 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:28:18.410587 tst iperf3.py: using LAC 35760 19:28:18.534373 tst iperf3.py: using RAC 60 19:28:18.656567 tst iperf3.py: using CellId 35760 19:28:18.780209 tst iperf3.py: using BVCI 35761 19:28:18.803624 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.814693 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.825532 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.836286 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.847501 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.858848 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.870353 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.881540 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:28:18.893000 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:28:19.173385 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:28:19.300919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:28:19.620219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22565): Launched 19:28:19.884401 run iperf3-srv_10.42.42.10(pid=22566): Launched 19:28:20.070973 tst iperf3.py:8: start network... 19:28:20.198610 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:28:20.690228 run create_hlr_db(pid=22567): Launched 19:28:20.874387 bus /gobi_6: Setting Powered False 19:28:21.888264 run create_hlr_db(pid=22567): Terminated: ok {rc=0} 19:28:22.326266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22569): Launched 19:28:22.658088 run osmo-hlr_10.42.42.2(pid=22570): Launched 19:28:22.779235 run osmo-stp_10.42.42.5: Starting osmo-stp 19:28:23.347981 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22572): Launched 19:28:23.679748 run osmo-stp_10.42.42.5(pid=22573): Launched 19:28:23.798974 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:28:24.370012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22575): Launched 19:28:24.487152 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:28:24.774152 run patchelf(pid=22576): Launched 19:28:24.966049 run osmo-stp_10.42.42.5(pid=22573): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22573)] 19:28:25.106194 run osmo-stp_10.42.42.5(pid=22573): stdout: | (launched: 2022-12-13_19:28:23.514360) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:28:25.247069 run osmo-stp_10.42.42.5(pid=22573): stderr: | �[0;m�[38;5;43m20221213192823706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192823706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192823707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192823707 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:28:25.383226 run osmo-stp_10.42.42.5(pid=22573): stdout: | (launched: 2022-12-13_19:28:23.514360) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:28:25.517856 run osmo-stp_10.42.42.5(pid=22573): stderr: | �[0;m�[38;5;43m20221213192823706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192823706 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192823707 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192823707 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192823708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:28:25.674897 run patchelf(pid=22576): Terminating (SIGINT) 19:28:25.858179 run patchelf(pid=22576): Terminated: ok {rc=0} 19:28:25.891796 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22573): Process ended prematurely: osmo-stp_10.42.42.5(pid=22573) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22573)] [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8] 19:28:25.901741 tst iperf3.py:8: Test FAILED (7.7 sec) 19:28:25.965670 run osmo-hlr_10.42.42.2(pid=22570): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22570)] 19:28:26.017890 run osmo-hlr_10.42.42.2(pid=22570): stdout: | (launched: 2022-12-13_19:28:22.493714) 19:28:26.070498 run osmo-hlr_10.42.42.2(pid=22570): stderr: | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192822690 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192822703 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-lms+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192822712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192822712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192822712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:28:26.115574 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22565): Terminating (SIGTERM) 19:28:26.158790 run iperf3-srv_10.42.42.10(pid=22566): Terminating (SIGTERM) 19:28:26.201209 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22569): Terminating (SIGTERM) 19:28:26.244197 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22572): Terminating (SIGTERM) 19:28:26.287186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22575): Terminating (SIGTERM) 19:28:26.297142 --- ParallelTerminationStrategy: PID 22565 died... 19:28:26.354206 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22565): Terminated: ok {rc=0} 19:28:26.364350 --- ParallelTerminationStrategy: PID 22566 died... 19:28:26.420886 run iperf3-srv_10.42.42.10(pid=22566): Terminated {rc=256} 19:28:26.430964 --- ParallelTerminationStrategy: PID 22569 died... 19:28:26.487733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22569): Terminated: ok {rc=0} 19:28:26.497901 --- ParallelTerminationStrategy: PID 22572 died... 19:28:26.554859 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22572): Terminated: ok {rc=0} 19:28:26.564927 --- ParallelTerminationStrategy: PID 22575 died... 19:28:26.621677 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22575): Terminated: ok {rc=0} 19:28:26.710053 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22573): Process ended prematurely: osmo-stp_10.42.42.5(pid=22573) [trial-2393↪gprs:trx-lms+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22573)]