Failed

gprs:trx-umtrx+mod-bts0-egprs.ping.py (from gprs_trx-umtrx+mod-bts0-egprs)

Failing for the past 255 builds (Since #2139 )

Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=21705): Process ended prematurely: osmo-stp_10.42.42.5(pid=21705) [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21705)]

Standard Output

----------------------------------------------
trial-2393 gprs:trx-umtrx+mod-bts0-egprs ping.py
----------------------------------------------
19:19:51.031647 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.043287 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1)
19:19:51.188387 tst                          ping.py: using LAC 35715
19:19:51.317085 tst                          ping.py: using RAC 15
19:19:51.445430 tst                          ping.py: using CellId 35715
19:19:51.575095 tst                          ping.py: using BVCI 35716
19:19:51.600217 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.611856 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.623379 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.634705 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.646243 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.657780 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.669684 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9)
19:19:51.681287 tst    gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4)
19:19:51.958313 tst                       ping.py:19: start network...
19:19:52.083601 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
19:19:52.569877 run         create_hlr_db(pid=21699): Launched
19:19:52.744443 bus                          /gobi_6: Setting Powered False
19:19:53.765987 run         create_hlr_db(pid=21699): Terminated: ok {rc=0}
19:19:54.197612 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21701): Launched
19:19:54.522972 run   osmo-hlr_10.42.42.2(pid=21702): Launched
19:19:54.641267 run              osmo-stp_10.42.42.5: Starting osmo-stp
19:19:55.205597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21704): Launched
19:19:55.529680 run   osmo-stp_10.42.42.5(pid=21705): Launched
19:19:55.646731 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
19:19:56.210335 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21707): Launched
19:19:56.326780 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
19:19:56.609717 run              patchelf(pid=21708): Launched
19:19:56.799101 run   osmo-stp_10.42.42.5(pid=21705): ERR: Terminated: ERROR {rc=1}  [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21705)]
19:19:56.937415 run   osmo-stp_10.42.42.5(pid=21705): stdout: 
| (launched: 2022-12-13_19:19:55.370699)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:19:57.076167 run   osmo-stp_10.42.42.5(pid=21705): stderr: 
| �[0;m�[38;5;43m20221213191955559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213191955559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213191955560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213191955560 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:19:57.210453 run   osmo-stp_10.42.42.5(pid=21705): stdout: 
| (launched: 2022-12-13_19:19:55.370699)
| Copyright (C) 2015-2020 by Harald Welte &lt;laforge@gnumonks.org&gt;
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later &lt;http://gnu.org/licenses/gpl-2.0.html&gt;
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
19:19:57.344171 run   osmo-stp_10.42.42.5(pid=21705): stderr: 
| �[0;m�[38;5;43m20221213191955559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213191955559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213191955560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213191955560 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213191955561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
19:19:57.498598 run              patchelf(pid=21708): Terminating (SIGINT)
19:19:57.679373 run              patchelf(pid=21708): Terminated: ok {rc=0}
19:19:57.712037 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21705): Process ended prematurely: osmo-stp_10.42.42.5(pid=21705) [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21705)]  [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22]
19:19:57.721308 tst                       ping.py:22: Test FAILED (6.7 sec)
19:19:57.785241 run   osmo-hlr_10.42.42.2(pid=21702): ERR: Terminated: ERROR {rc=237}  [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21702)]
19:19:57.837490 run   osmo-hlr_10.42.42.2(pid=21702): stdout: 
| (launched: 2022-12-13_19:19:54.363388) 
19:19:57.890493 run   osmo-hlr_10.42.42.2(pid=21702): stderr: 
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213191954558 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213191954599 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-umtrx+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213191954609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213191954609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213191954609 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
19:19:57.935638 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21701): Terminating (SIGTERM)
19:19:57.978347 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21704): Terminating (SIGTERM)
19:19:58.021204 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21707): Terminating (SIGTERM)
19:19:58.031111 ---      ParallelTerminationStrategy: PID 21701 died...
19:19:58.088415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21701): Terminated: ok {rc=0}
19:19:58.098761 ---      ParallelTerminationStrategy: PID 21704 died...
19:19:58.154829 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21704): Terminated: ok {rc=0}
19:19:58.165067 ---      ParallelTerminationStrategy: PID 21707 died...
19:19:58.221399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21707): Terminated: ok {rc=0}
19:19:58.309753 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21705): Process ended prematurely: osmo-stp_10.42.42.5(pid=21705) [trial-2393↪gprs:trx-umtrx+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21705)]