Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=21887): Process ended prematurely: osmo-stp_10.42.42.5(pid=21887) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21887)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 19:22:21.957019 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:21.969011 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 19:22:22.111723 tst iperf3.py: using LAC 35728 19:22:22.232368 tst iperf3.py: using RAC 28 19:22:22.353959 tst iperf3.py: using CellId 35728 19:22:22.475389 tst iperf3.py: using BVCI 35729 19:22:22.498733 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.510158 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.521365 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.532388 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.543572 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.554681 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.565977 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.577087 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 19:22:22.588489 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 19:22:22.887073 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:22:23.023473 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:22:23.360540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21879): Launched 19:22:23.641452 run iperf3-srv_10.42.42.10(pid=21880): Launched 19:22:23.840708 tst iperf3.py:8: start network... 19:22:23.976881 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:22:24.489948 run create_hlr_db(pid=21881): Launched 19:22:24.677121 bus /gobi_6: Setting Powered False 19:22:25.698587 run create_hlr_db(pid=21881): Terminated: ok {rc=0} 19:22:26.129354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21883): Launched 19:22:26.454886 run osmo-hlr_10.42.42.2(pid=21884): Launched 19:22:26.577493 run osmo-stp_10.42.42.5: Starting osmo-stp 19:22:27.140386 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21886): Launched 19:22:27.466070 run osmo-stp_10.42.42.5(pid=21887): Launched 19:22:27.585361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:22:28.151927 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21889): Launched 19:22:28.268104 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:22:28.551834 run patchelf(pid=21890): Launched 19:22:28.741827 run osmo-stp_10.42.42.5(pid=21887): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21887)] 19:22:28.881146 run osmo-stp_10.42.42.5(pid=21887): stdout: | (launched: 2022-12-13_19:22:27.305904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:22:29.020349 run osmo-stp_10.42.42.5(pid=21887): stderr: | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192227495 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:22:29.155137 run osmo-stp_10.42.42.5(pid=21887): stdout: | (launched: 2022-12-13_19:22:27.305904) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:22:29.288850 run osmo-stp_10.42.42.5(pid=21887): stderr: | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213192227495 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213192227495 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213192227496 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:22:29.444827 run patchelf(pid=21890): Terminating (SIGINT) 19:22:29.627374 run patchelf(pid=21890): Terminated: ok {rc=0} 19:22:29.660804 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=21887): Process ended prematurely: osmo-stp_10.42.42.5(pid=21887) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21887)] [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 19:22:29.670835 tst iperf3.py:8: Test FAILED (7.7 sec) 19:22:29.734316 run osmo-hlr_10.42.42.2(pid=21884): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21884)] 19:22:29.786218 run osmo-hlr_10.42.42.2(pid=21884): stdout: | (launched: 2022-12-13_19:22:26.294613) 19:22:29.838924 run osmo-hlr_10.42.42.2(pid=21884): stderr: | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213192226489 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213192226502 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213192226510 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213192226511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213192226511 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:22:29.883695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21879): Terminating (SIGTERM) 19:22:29.926320 run iperf3-srv_10.42.42.10(pid=21880): Terminating (SIGTERM) 19:22:29.968575 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21883): Terminating (SIGTERM) 19:22:30.011425 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21886): Terminating (SIGTERM) 19:22:30.053880 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21889): Terminating (SIGTERM) 19:22:30.063586 --- ParallelTerminationStrategy: PID 21879 died... 19:22:30.120713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21879): Terminated: ok {rc=0} 19:22:30.130880 --- ParallelTerminationStrategy: PID 21880 died... 19:22:30.187295 run iperf3-srv_10.42.42.10(pid=21880): Terminated {rc=256} 19:22:30.197464 --- ParallelTerminationStrategy: PID 21883 died... 19:22:30.253977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21883): Terminated: ok {rc=0} 19:22:30.264083 --- ParallelTerminationStrategy: PID 21886 died... 19:22:30.320665 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21886): Terminated: ok {rc=0} 19:22:30.330841 --- ParallelTerminationStrategy: PID 21889 died... 19:22:30.388084 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21889): Terminated: ok {rc=0} 19:22:30.475483 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21887): Process ended prematurely: osmo-stp_10.42.42.5(pid=21887) [trial-2393↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21887)]