Failed
gprs:trx-b200+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=20346): Process ended prematurely: osmo-stp_10.42.42.5(pid=20346) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20346)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-b200+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 19:04:09.889690 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:09.902015 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:04:10.068556 tst iperf3.py: using LAC 35632 19:04:10.189837 tst iperf3.py: using RAC 187 19:04:10.311756 tst iperf3.py: using CellId 35632 19:04:10.432004 tst iperf3.py: using BVCI 35633 19:04:10.455500 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.466517 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.477232 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.487927 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.499200 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.510588 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.522244 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.533524 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:04:10.544855 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:04:10.846353 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 19:04:10.984001 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:04:11.307800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20338): Launched 19:04:11.570269 run iperf3-srv_10.42.42.10(pid=20339): Launched 19:04:11.756482 tst iperf3.py:8: start network... 19:04:11.883919 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:04:12.373313 run create_hlr_db(pid=20340): Launched 19:04:12.548332 bus /gobi_6: Setting Powered False 19:04:13.569207 run create_hlr_db(pid=20340): Terminated: ok {rc=0} 19:04:14.004676 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20342): Launched 19:04:14.331959 run osmo-hlr_10.42.42.2(pid=20343): Launched 19:04:14.455178 run osmo-stp_10.42.42.5: Starting osmo-stp 19:04:15.025877 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20345): Launched 19:04:15.355557 run osmo-stp_10.42.42.5(pid=20346): Launched 19:04:15.474231 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:04:16.066579 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20348): Launched 19:04:16.178887 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:04:16.474115 run patchelf(pid=20349): Launched 19:04:16.660745 run osmo-stp_10.42.42.5(pid=20346): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20346)] 19:04:16.798039 run osmo-stp_10.42.42.5(pid=20346): stdout: | (launched: 2022-12-13_19:04:15.193724) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:04:16.935379 run osmo-stp_10.42.42.5(pid=20346): stderr: | �[0;m�[38;5;43m20221213190415383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190415384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190415384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190415384 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:04:17.066751 run osmo-stp_10.42.42.5(pid=20346): stdout: | (launched: 2022-12-13_19:04:15.193724) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:04:17.196174 run osmo-stp_10.42.42.5(pid=20346): stderr: | �[0;m�[38;5;43m20221213190415383 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213190415384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213190415384 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213190415384 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213190415385 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:04:17.342961 run patchelf(pid=20349): Terminating (SIGINT) 19:04:17.515656 run patchelf(pid=20349): Terminated: ok {rc=0} 19:04:17.547544 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20346): Process ended prematurely: osmo-stp_10.42.42.5(pid=20346) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20346)] [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8] 19:04:17.556990 tst iperf3.py:8: Test FAILED (7.7 sec) 19:04:17.618160 run osmo-hlr_10.42.42.2(pid=20343): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20343)] 19:04:17.668072 run osmo-hlr_10.42.42.2(pid=20343): stdout: | (launched: 2022-12-13_19:04:14.171897) 19:04:17.718802 run osmo-hlr_10.42.42.2(pid=20343): stderr: | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213190414367 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213190414379 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-b200+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213190414389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213190414389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213190414389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:04:17.761860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20338): Terminating (SIGTERM) 19:04:17.802171 run iperf3-srv_10.42.42.10(pid=20339): Terminating (SIGTERM) 19:04:17.842683 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20342): Terminating (SIGTERM) 19:04:17.883173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20345): Terminating (SIGTERM) 19:04:17.923572 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20348): Terminating (SIGTERM) 19:04:17.932877 --- ParallelTerminationStrategy: PID 20338 died... 19:04:17.987048 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20338): Terminated: ok {rc=0} 19:04:17.996665 --- ParallelTerminationStrategy: PID 20339 died... 19:04:18.050156 run iperf3-srv_10.42.42.10(pid=20339): Terminated {rc=256} 19:04:18.059788 --- ParallelTerminationStrategy: PID 20342 died... 19:04:18.113588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20342): Terminated: ok {rc=0} 19:04:18.123232 --- ParallelTerminationStrategy: PID 20345 died... 19:04:18.176916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20345): Terminated: ok {rc=0} 19:04:18.186675 --- ParallelTerminationStrategy: PID 20348 died... 19:04:18.240520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20348): Terminated: ok {rc=0} 19:04:18.329858 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20346): Process ended prematurely: osmo-stp_10.42.42.5(pid=20346) [trial-2393↪gprs:trx-b200+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20346)]