Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=21200): Process ended prematurely: osmo-stp_10.42.42.5(pid=21200) [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21200)]
Standard Output
---------------------------------------------- trial-2393 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 19:12:36.456028 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:36.467905 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 19:12:36.626113 tst ping.py: using LAC 35676 19:12:36.748385 tst ping.py: using RAC 231 19:12:36.865132 tst ping.py: using CellId 35676 19:12:36.981104 tst ping.py: using BVCI 35677 19:12:37.004230 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.015608 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.026796 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.037862 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.048724 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.059639 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.070731 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 19:12:37.081651 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 19:12:37.356142 tst ping.py:19: start network... 19:12:37.480622 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:12:37.961634 run create_hlr_db(pid=21194): Launched 19:12:38.134343 bus /gobi_6: Setting Powered False 19:12:39.155818 run create_hlr_db(pid=21194): Terminated: ok {rc=0} 19:12:39.585534 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21196): Launched 19:12:39.910045 run osmo-hlr_10.42.42.2(pid=21197): Launched 19:12:40.030963 run osmo-stp_10.42.42.5: Starting osmo-stp 19:12:40.598588 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21199): Launched 19:12:40.923558 run osmo-stp_10.42.42.5(pid=21200): Launched 19:12:41.040897 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:12:41.607450 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21202): Launched 19:12:41.723037 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:12:42.006047 run patchelf(pid=21203): Launched 19:12:42.195548 run osmo-stp_10.42.42.5(pid=21200): ERR: Terminated: ERROR {rc=1} [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21200)] 19:12:42.334045 run osmo-stp_10.42.42.5(pid=21200): stdout: | (launched: 2022-12-13_19:12:40.762812) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:12:42.472171 run osmo-stp_10.42.42.5(pid=21200): stderr: | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213191240957 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:12:42.606136 run osmo-stp_10.42.42.5(pid=21200): stdout: | (launched: 2022-12-13_19:12:40.762812) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:12:42.739154 run osmo-stp_10.42.42.5(pid=21200): stderr: | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213191240957 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213191240957 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213191240958 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:12:42.893672 run patchelf(pid=21203): Terminating (SIGINT) 19:12:43.074977 run patchelf(pid=21203): Terminated: ok {rc=0} 19:12:43.107839 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=21200): Process ended prematurely: osmo-stp_10.42.42.5(pid=21200) [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21200)] [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22] 19:12:43.117324 tst ping.py:22: Test FAILED (6.6 sec) 19:12:43.181459 run osmo-hlr_10.42.42.2(pid=21197): ERR: Terminated: ERROR {rc=237} [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=21197)] 19:12:43.233829 run osmo-hlr_10.42.42.2(pid=21197): stdout: | (launched: 2022-12-13_19:12:39.749056) 19:12:43.286904 run osmo-hlr_10.42.42.2(pid=21197): stderr: | �[0;m�[1;31m20221213191239949 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213191239950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213191239950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213191239950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213191239950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213191239950 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213191239965 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2393/run.2022-12-13_18-38-33/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213191239975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213191239975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213191239975 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:12:43.332229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21196): Terminating (SIGTERM) 19:12:43.375104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21199): Terminating (SIGTERM) 19:12:43.417884 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21202): Terminating (SIGTERM) 19:12:43.427772 --- ParallelTerminationStrategy: PID 21196 died... 19:12:43.485130 run pcap-recorder_any(filters='host 10.42.42.2')(pid=21196): Terminated: ok {rc=0} 19:12:43.495477 --- ParallelTerminationStrategy: PID 21199 died... 19:12:43.552198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=21199): Terminated: ok {rc=0} 19:12:43.562456 --- ParallelTerminationStrategy: PID 21202 died... 19:12:43.619018 run pcap-recorder_any(filters='host 10.42.42.6')(pid=21202): Terminated: ok {rc=0} 19:12:43.706564 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=21200): Process ended prematurely: osmo-stp_10.42.42.5(pid=21200) [trial-2393↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=21200)]