Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1121): Process ended prematurely: osmo-stp_10.42.42.5(pid=1121) [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1121)]
Standard Output
---------------------------------------------- trial-2394 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 21:18:15.170613 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.182675 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:18:15.344467 tst iperf3.py: using LAC 36339 21:18:15.465705 tst iperf3.py: using RAC 129 21:18:15.586812 tst iperf3.py: using CellId 36339 21:18:15.709548 tst iperf3.py: using BVCI 36340 21:18:15.733069 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.744232 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.755192 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.765983 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.776935 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.788078 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.799337 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.810516 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:18:15.821800 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:18:16.180663 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:18:16.316842 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:18:16.680849 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1111): Launched 21:18:16.970559 run iperf3-srv_10.42.42.10(pid=1112): Launched 21:18:17.166522 tst iperf3.py:8: start network... 21:18:17.296823 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:18:17.779718 run create_hlr_db(pid=1114): Launched 21:18:17.955713 bus /gobi_6: Setting Powered False 21:18:18.978489 run create_hlr_db(pid=1114): Terminated: ok {rc=0} 21:18:19.413797 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1116): Launched 21:18:19.741578 run osmo-hlr_10.42.42.2(pid=1117): Launched 21:18:19.862266 run osmo-stp_10.42.42.5: Starting osmo-stp 21:18:20.433526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1120): Launched 21:18:20.764073 run osmo-stp_10.42.42.5(pid=1121): Launched 21:18:20.882954 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:18:21.454224 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1123): Launched 21:18:21.571107 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:18:21.858601 run patchelf(pid=1128): Launched 21:18:22.049920 run osmo-stp_10.42.42.5(pid=1121): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1121)] 21:18:22.189598 run osmo-stp_10.42.42.5(pid=1121): stdout: | (launched: 2022-12-13_21:18:20.600425) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:18:22.329186 run osmo-stp_10.42.42.5(pid=1121): stderr: | �[0;m�[38;5;43m20221213211820790 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213211820791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213211820791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213211820791 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:18:22.464743 run osmo-stp_10.42.42.5(pid=1121): stdout: | (launched: 2022-12-13_21:18:20.600425) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:18:22.599143 run osmo-stp_10.42.42.5(pid=1121): stderr: | �[0;m�[38;5;43m20221213211820790 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213211820791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213211820791 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213211820791 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213211820792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:18:22.756705 run patchelf(pid=1128): Terminating (SIGINT) 21:18:22.941911 run patchelf(pid=1128): Terminated: ok {rc=0} 21:18:22.975700 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1121): Process ended prematurely: osmo-stp_10.42.42.5(pid=1121) [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1121)] [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8] 21:18:22.985603 tst iperf3.py:8: Test FAILED (7.8 sec) 21:18:23.048542 run osmo-hlr_10.42.42.2(pid=1117): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1117)] 21:18:23.100079 run osmo-hlr_10.42.42.2(pid=1117): stdout: | (launched: 2022-12-13_21:18:19.580826) 21:18:23.152237 run osmo-hlr_10.42.42.2(pid=1117): stderr: | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213211819781 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213211819795 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213211819803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213211819803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213211819803 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:18:23.196679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1111): Terminating (SIGTERM) 21:18:23.239362 run iperf3-srv_10.42.42.10(pid=1112): Terminating (SIGTERM) 21:18:23.281393 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1116): Terminating (SIGTERM) 21:18:23.323392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1120): Terminating (SIGTERM) 21:18:23.365266 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1123): Terminating (SIGTERM) 21:18:23.375011 --- ParallelTerminationStrategy: PID 1111 died... 21:18:23.430860 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1111): Terminated: ok {rc=0} 21:18:23.440831 --- ParallelTerminationStrategy: PID 1112 died... 21:18:23.496932 run iperf3-srv_10.42.42.10(pid=1112): Terminated {rc=256} 21:18:23.507036 --- ParallelTerminationStrategy: PID 1116 died... 21:18:23.562753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1116): Terminated: ok {rc=0} 21:18:23.572761 --- ParallelTerminationStrategy: PID 1120 died... 21:18:23.628339 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1120): Terminated: ok {rc=0} 21:18:23.638410 --- ParallelTerminationStrategy: PID 1123 died... 21:18:23.694186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1123): Terminated: ok {rc=0} 21:18:23.782671 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1121): Process ended prematurely: osmo-stp_10.42.42.5(pid=1121) [trial-2394↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1121)]