Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:sysmo.ping_idle_ping.py (from gprs_sysmo)

Failing for the past 64 builds (Since #2331 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=26250): Process ended prematurely: osmo-stp_10.42.42.5(pid=26250) [trial-2394↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26250)]

Standard Output

----------------------------------------------
trial-2394 gprs:sysmo ping_idle_ping.py
----------------------------------------------
20:12:50.209359 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.220715 tst                       gprs:sysmo: Using 1 x bts (candidates: 1)
20:12:50.355610 tst                ping_idle_ping.py: using LAC 35993
20:12:50.483897 tst                ping_idle_ping.py: using RAC 38
20:12:50.612488 tst                ping_idle_ping.py: using CellId 35993
20:12:50.740403 tst                ping_idle_ping.py: using BVCI 35994
20:12:50.765619 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.776939 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.788485 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.799644 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.810960 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.822029 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.833293 tst                       gprs:sysmo: Using 1 x ip_address (candidates: 9)
20:12:50.845001 tst                       gprs:sysmo: Using 1 x modem (candidates: 4)
20:12:51.152858 tst             ping_idle_ping.py:24: start network...
20:12:51.289813 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:12:51.813917 run         create_hlr_db(pid=26224): Launched
20:12:52.005273 bus                          /gobi_6: Setting Powered False
20:12:53.024039 run         create_hlr_db(pid=26224): Terminated: ok {rc=0}
20:12:53.436055 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26245): Launched
20:12:53.743665 run   osmo-hlr_10.42.42.2(pid=26246): Launched
20:12:53.854001 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:12:54.383621 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26248): Launched
20:12:54.690212 run   osmo-stp_10.42.42.5(pid=26250): Launched
20:12:54.810444 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:12:55.350729 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26252): Launched
20:12:55.459153 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:12:55.728007 run              patchelf(pid=26253): Launched
20:12:55.906955 run   osmo-stp_10.42.42.5(pid=26250): ERR: Terminated: ERROR {rc=1}  [trial-2394↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26250)]
20:12:56.038289 run   osmo-stp_10.42.42.5(pid=26250): stdout: 
| (launched: 2022-12-13_20:12:54.537580)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:12:56.168832 run   osmo-stp_10.42.42.5(pid=26250): stderr: 
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213201254711 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:12:56.295604 run   osmo-stp_10.42.42.5(pid=26250): stdout: 
| (launched: 2022-12-13_20:12:54.537580)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:12:56.421546 run   osmo-stp_10.42.42.5(pid=26250): stderr: 
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213201254711 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213201254711 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213201254712 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:12:56.568030 run              patchelf(pid=26253): Terminating (SIGINT)
20:12:56.740143 run              patchelf(pid=26253): Terminated: ok {rc=0}
20:12:56.771166 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=26250): Process ended prematurely: osmo-stp_10.42.42.5(pid=26250) [trial-2394↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26250)]  [trial-2394↪gprs:sysmo↪ping_idle_ping.py:27]
20:12:56.779674 tst             ping_idle_ping.py:27: Test FAILED (6.6 sec)
20:12:56.840748 run   osmo-hlr_10.42.42.2(pid=26246): ERR: Terminated: ERROR {rc=237}  [trial-2394↪gprs:sysmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26246)]
20:12:56.890496 run   osmo-hlr_10.42.42.2(pid=26246): stdout: 
| (launched: 2022-12-13_20:12:53.591248) 
20:12:56.941048 run   osmo-hlr_10.42.42.2(pid=26246): stderr: 
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213201253770 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213201253825 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:sysmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213201253835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213201253836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213201253836 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:12:56.984062 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26245): Terminating (SIGTERM)
20:12:57.029098 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26248): Terminating (SIGTERM)
20:12:57.071956 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26252): Terminating (SIGTERM)
20:12:57.081774 ---      ParallelTerminationStrategy: PID 26245 died...
20:12:57.139099 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26245): Terminated: ok {rc=0}
20:12:57.149259 ---      ParallelTerminationStrategy: PID 26248 died...
20:12:57.206524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26248): Terminated: ok {rc=0}
20:12:57.217042 ---      ParallelTerminationStrategy: PID 26252 died...
20:12:57.274116 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26252): Terminated: ok {rc=0}
20:12:57.362429 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26250): Process ended prematurely: osmo-stp_10.42.42.5(pid=26250) [trial-2394↪gprs:sysmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26250)]