Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29246): Process ended prematurely: osmo-stp_10.42.42.5(pid=29246) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29246)]
Standard Output
---------------------------------------------- trial-2394 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 20:40:18.509134 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:18.521224 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 20:40:18.680302 tst ping.py: using LAC 36137 20:40:18.799579 tst ping.py: using RAC 182 20:40:18.918824 tst ping.py: using CellId 36137 20:40:19.037203 tst ping.py: using BVCI 36138 20:40:19.059947 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.071023 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.081954 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.092792 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.103804 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.114929 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.126186 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 20:40:19.137321 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 20:40:19.429947 tst ping.py:19: start network... 20:40:19.563559 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:40:20.072191 run create_hlr_db(pid=29240): Launched 20:40:20.256868 bus /gobi_6: Setting Powered False 20:40:21.277044 run create_hlr_db(pid=29240): Terminated: ok {rc=0} 20:40:21.676927 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29242): Launched 20:40:21.975267 run osmo-hlr_10.42.42.2(pid=29243): Launched 20:40:22.088705 run osmo-stp_10.42.42.5: Starting osmo-stp 20:40:22.615225 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29245): Launched 20:40:22.913204 run osmo-stp_10.42.42.5(pid=29246): Launched 20:40:23.021168 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:40:23.540263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29248): Launched 20:40:23.646009 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:40:23.908311 run patchelf(pid=29249): Launched 20:40:24.083749 run osmo-stp_10.42.42.5(pid=29246): ERR: Terminated: ERROR {rc=1} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29246)] 20:40:24.211684 run osmo-stp_10.42.42.5(pid=29246): stdout: | (launched: 2022-12-13_20:40:22.766454) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:24.340246 run osmo-stp_10.42.42.5(pid=29246): stderr: | �[0;m�[38;5;43m20221213204022933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204022934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204022934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204022934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:24.464807 run osmo-stp_10.42.42.5(pid=29246): stdout: | (launched: 2022-12-13_20:40:22.766454) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:40:24.588538 run osmo-stp_10.42.42.5(pid=29246): stderr: | �[0;m�[38;5;43m20221213204022933 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213204022934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213204022934 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213204022934 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213204022935 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:40:24.732899 run patchelf(pid=29249): Terminating (SIGINT) 20:40:24.902042 run patchelf(pid=29249): Terminated: ok {rc=0} 20:40:24.932731 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29246): Process ended prematurely: osmo-stp_10.42.42.5(pid=29246) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29246)] [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22] 20:40:24.941842 tst ping.py:22: Test FAILED (6.4 sec) 20:40:25.002526 run osmo-hlr_10.42.42.2(pid=29243): ERR: Terminated: ERROR {rc=237} [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29243)] 20:40:25.052190 run osmo-hlr_10.42.42.2(pid=29243): stdout: | (launched: 2022-12-13_20:40:21.828467) 20:40:25.102470 run osmo-hlr_10.42.42.2(pid=29243): stderr: | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213204021999 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213204022012 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2394/run.2022-12-13_20-06-05/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213204022020 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213204022021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213204022021 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:40:25.145434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29242): Terminating (SIGTERM) 20:40:25.185934 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29245): Terminating (SIGTERM) 20:40:25.226241 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29248): Terminating (SIGTERM) 20:40:25.235519 --- ParallelTerminationStrategy: PID 29242 died... 20:40:25.289801 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29242): Terminated: ok {rc=0} 20:40:25.299401 --- ParallelTerminationStrategy: PID 29245 died... 20:40:25.353687 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29245): Terminated: ok {rc=0} 20:40:25.363312 --- ParallelTerminationStrategy: PID 29248 died... 20:40:25.417620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29248): Terminated: ok {rc=0} 20:40:25.502031 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29246): Process ended prematurely: osmo-stp_10.42.42.5(pid=29246) [trial-2394↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29246)]