Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10667): Process ended prematurely: osmo-stp_10.42.42.5(pid=10667) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10667)]
Standard Output
---------------------------------------------- trial-2395 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 22:56:42.524324 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:42.536261 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:56:42.699175 tst ping.py: using LAC 36802 22:56:42.822107 tst ping.py: using RAC 82 22:56:42.937543 tst ping.py: using CellId 36802 22:56:43.052889 tst ping.py: using BVCI 36803 22:56:43.075665 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.086697 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.097537 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.108238 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.119005 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.129862 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.140665 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:43.151458 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:56:43.423398 tst ping.py:19: start network... 22:56:43.547075 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:56:44.023434 run create_hlr_db(pid=10661): Launched 22:56:44.195193 bus /gobi_6: Setting Powered False 22:56:45.217190 run create_hlr_db(pid=10661): Terminated: ok {rc=0} 22:56:45.643480 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10663): Launched 22:56:46.125067 run osmo-hlr_10.42.42.2(pid=10664): Launched 22:56:46.318107 run osmo-stp_10.42.42.5: Starting osmo-stp 22:56:46.959716 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10666): Launched 22:56:47.335370 run osmo-stp_10.42.42.5(pid=10667): Launched 22:56:47.445970 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:56:47.967424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10669): Launched 22:56:48.073294 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:56:48.333139 run patchelf(pid=10670): Launched 22:56:48.507346 run osmo-stp_10.42.42.5(pid=10667): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10667)] 22:56:48.634286 run osmo-stp_10.42.42.5(pid=10667): stdout: | (launched: 2022-12-13_22:56:47.125813) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:48.761444 run osmo-stp_10.42.42.5(pid=10667): stderr: | �[0;m�[38;5;43m20221213225647352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225647353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225647353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225647353 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:48.884566 run osmo-stp_10.42.42.5(pid=10667): stdout: | (launched: 2022-12-13_22:56:47.125813) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:49.006278 run osmo-stp_10.42.42.5(pid=10667): stderr: | �[0;m�[38;5;43m20221213225647352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213225647353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213225647353 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213225647353 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213225647354 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:49.148465 run patchelf(pid=10670): Terminating (SIGINT) 22:56:49.315964 run patchelf(pid=10670): Terminated: ok {rc=0} 22:56:49.346557 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10667): Process ended prematurely: osmo-stp_10.42.42.5(pid=10667) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10667)] [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22] 22:56:49.355152 tst ping.py:22: Test FAILED (6.8 sec) 22:56:49.414961 run osmo-hlr_10.42.42.2(pid=10664): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10664)] 22:56:49.463597 run osmo-hlr_10.42.42.2(pid=10664): stdout: | (launched: 2022-12-13_22:56:45.806628) 22:56:49.512999 run osmo-hlr_10.42.42.2(pid=10664): stderr: | �[0;m�[1;31m20221213225646237 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213225646238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213225646238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213225646238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213225646238 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213225646240 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213225646265 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213225646280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213225646280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213225646280 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:56:49.555417 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10663): Terminating (SIGTERM) 22:56:49.595224 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10666): Terminating (SIGTERM) 22:56:49.634645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10669): Terminating (SIGTERM) 22:56:49.643900 --- ParallelTerminationStrategy: PID 10663 died... 22:56:49.697229 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10663): Terminated: ok {rc=0} 22:56:49.706900 --- ParallelTerminationStrategy: PID 10666 died... 22:56:49.760836 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10666): Terminated: ok {rc=0} 22:56:49.770595 --- ParallelTerminationStrategy: PID 10669 died... 22:56:49.823558 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10669): Terminated: ok {rc=0} 22:56:49.912585 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10667): Process ended prematurely: osmo-stp_10.42.42.5(pid=10667) [trial-2395↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10667)]