Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5126): Process ended prematurely: osmo-stp_10.42.42.5(pid=5126) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5126)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 22:00:24.742571 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:24.754276 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:24.933998 tst iperf3.py: using LAC 36503 22:00:25.061024 tst iperf3.py: using RAC 38 22:00:25.186887 tst iperf3.py: using CellId 36503 22:00:25.312785 tst iperf3.py: using BVCI 36504 22:00:25.337430 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.348581 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.359507 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.370558 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.381766 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.393061 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.404384 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.415592 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:25.427089 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:25.721103 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:00:25.855999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:26.189582 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5118): Launched 22:00:26.466363 run iperf3-srv_10.42.42.10(pid=5119): Launched 22:00:26.663437 tst iperf3.py:8: start network... 22:00:26.798369 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:27.303891 run create_hlr_db(pid=5120): Launched 22:00:27.489519 bus /gobi_6: Setting Powered False 22:00:28.511703 run create_hlr_db(pid=5120): Terminated: ok {rc=0} 22:00:28.916470 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5122): Launched 22:00:29.217313 run osmo-hlr_10.42.42.2(pid=5123): Launched 22:00:29.327967 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:29.850192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5125): Launched 22:00:30.150437 run osmo-stp_10.42.42.5(pid=5126): Launched 22:00:30.263000 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:30.787212 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5128): Launched 22:00:30.914702 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:31.242728 run patchelf(pid=5129): Launched 22:00:31.430346 run osmo-stp_10.42.42.5(pid=5126): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5126)] 22:00:31.566842 run osmo-stp_10.42.42.5(pid=5126): stdout: | (launched: 2022-12-13_22:00:30.002301) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:31.701481 run osmo-stp_10.42.42.5(pid=5126): stderr: | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220030175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:31.831548 run osmo-stp_10.42.42.5(pid=5126): stdout: | (launched: 2022-12-13_22:00:30.002301) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:31.960762 run osmo-stp_10.42.42.5(pid=5126): stderr: | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220030175 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220030175 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220030176 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:32.109280 run patchelf(pid=5129): Terminating (SIGINT) 22:00:32.282375 run patchelf(pid=5129): Terminated: ok {rc=0} 22:00:32.313568 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=5126): Process ended prematurely: osmo-stp_10.42.42.5(pid=5126) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5126)] [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 22:00:32.322864 tst iperf3.py:8: Test FAILED (7.6 sec) 22:00:32.383278 run osmo-hlr_10.42.42.2(pid=5123): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5123)] 22:00:32.432621 run osmo-hlr_10.42.42.2(pid=5123): stdout: | (launched: 2022-12-13_22:00:29.069144) 22:00:32.482385 run osmo-hlr_10.42.42.2(pid=5123): stderr: | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220029245 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220029258 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220029268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220029268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220029268 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:00:32.524731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5118): Terminating (SIGTERM) 22:00:32.564745 run iperf3-srv_10.42.42.10(pid=5119): Terminating (SIGTERM) 22:00:32.604849 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5122): Terminating (SIGTERM) 22:00:32.644787 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5125): Terminating (SIGTERM) 22:00:32.685008 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5128): Terminating (SIGTERM) 22:00:32.694101 --- ParallelTerminationStrategy: PID 5118 died... 22:00:32.748287 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5118): Terminated: ok {rc=0} 22:00:32.758191 --- ParallelTerminationStrategy: PID 5119 died... 22:00:32.812276 run iperf3-srv_10.42.42.10(pid=5119): Terminated {rc=256} 22:00:32.821751 --- ParallelTerminationStrategy: PID 5122 died... 22:00:32.875585 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5122): Terminated: ok {rc=0} 22:00:32.885072 --- ParallelTerminationStrategy: PID 5125 died... 22:00:32.938819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5125): Terminated: ok {rc=0} 22:00:32.948217 --- ParallelTerminationStrategy: PID 5128 died... 22:00:33.002079 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5128): Terminated: ok {rc=0} 22:00:33.090106 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5126): Process ended prematurely: osmo-stp_10.42.42.5(pid=5126) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5126)]