Failed
gprs:sysmo+mod-bts0-dynts-osmo.iperf3.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4374): Process ended prematurely: osmo-stp_10.42.42.5(pid=4374) [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4374)]
Standard Output
---------------------------------------------- trial-2395 gprs:sysmo+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 21:53:31.736836 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:31.752853 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 21:53:31.914746 tst iperf3.py: using LAC 36466 21:53:32.075195 tst iperf3.py: using RAC 1 21:53:32.205646 tst iperf3.py: using CellId 36466 21:53:32.328750 tst iperf3.py: using BVCI 36467 21:53:32.352092 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.363231 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.374074 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.384726 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.396363 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.407888 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.419500 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.431153 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:53:32.443158 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 21:53:32.738362 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:53:32.873633 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:53:33.208450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4366): Launched 21:53:33.486725 run iperf3-srv_10.42.42.10(pid=4367): Launched 21:53:33.684302 tst iperf3.py:8: start network... 21:53:33.819042 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:53:34.335181 run create_hlr_db(pid=4368): Launched 21:53:34.521734 bus /gobi_6: Setting Powered False 21:53:35.544755 run create_hlr_db(pid=4368): Terminated: ok {rc=0} 21:53:35.975146 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4370): Launched 21:53:36.298079 run osmo-hlr_10.42.42.2(pid=4371): Launched 21:53:36.420544 run osmo-stp_10.42.42.5: Starting osmo-stp 21:53:36.983620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4373): Launched 21:53:37.306685 run osmo-stp_10.42.42.5(pid=4374): Launched 21:53:37.425469 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:53:37.989080 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4376): Launched 21:53:38.105014 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:53:38.386957 run patchelf(pid=4377): Launched 21:53:38.575918 run osmo-stp_10.42.42.5(pid=4374): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4374)] 21:53:38.714109 run osmo-stp_10.42.42.5(pid=4374): stdout: | (launched: 2022-12-13_21:53:37.147805) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:53:38.852725 run osmo-stp_10.42.42.5(pid=4374): stderr: | �[0;m�[38;5;43m20221213215337339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215337339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215337340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215337340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:53:38.987003 run osmo-stp_10.42.42.5(pid=4374): stdout: | (launched: 2022-12-13_21:53:37.147805) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:53:39.119185 run osmo-stp_10.42.42.5(pid=4374): stderr: | �[0;m�[38;5;43m20221213215337339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215337339 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215337340 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215337340 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215337341 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:53:39.273423 run patchelf(pid=4377): Terminating (SIGINT) 21:53:39.454552 run patchelf(pid=4377): Terminated: ok {rc=0} 21:53:39.488066 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=4374): Process ended prematurely: osmo-stp_10.42.42.5(pid=4374) [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4374)] [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8] 21:53:39.497934 tst iperf3.py:8: Test FAILED (7.8 sec) 21:53:39.560277 run osmo-hlr_10.42.42.2(pid=4371): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4371)] 21:53:39.611430 run osmo-hlr_10.42.42.2(pid=4371): stdout: | (launched: 2022-12-13_21:53:36.139934) 21:53:39.663185 run osmo-hlr_10.42.42.2(pid=4371): stderr: | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213215336339 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213215336352 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:sysmo+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213215336360 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213215336361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213215336361 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:53:39.707220 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4366): Terminating (SIGTERM) 21:53:39.748579 run iperf3-srv_10.42.42.10(pid=4367): Terminating (SIGTERM) 21:53:39.790069 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4370): Terminating (SIGTERM) 21:53:39.831304 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4373): Terminating (SIGTERM) 21:53:39.872712 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4376): Terminating (SIGTERM) 21:53:39.882306 --- ParallelTerminationStrategy: PID 4366 died... 21:53:39.938041 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4366): Terminated: ok {rc=0} 21:53:39.948397 --- ParallelTerminationStrategy: PID 4367 died... 21:53:40.003634 run iperf3-srv_10.42.42.10(pid=4367): Terminated {rc=256} 21:53:40.013621 --- ParallelTerminationStrategy: PID 4370 died... 21:53:40.069124 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4370): Terminated: ok {rc=0} 21:53:40.079150 --- ParallelTerminationStrategy: PID 4373 died... 21:53:40.134831 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4373): Terminated: ok {rc=0} 21:53:40.144696 --- ParallelTerminationStrategy: PID 4376 died... 21:53:40.200123 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4376): Terminated: ok {rc=0} 21:53:40.286727 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4374): Process ended prematurely: osmo-stp_10.42.42.5(pid=4374) [trial-2395↪gprs:sysmo+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4374)]