Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4198): Process ended prematurely: osmo-stp_10.42.42.5(pid=4198) [trial-2395↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4198)]
Standard Output
---------------------------------------------- trial-2395 gprs:sysmo ping.py ---------------------------------------------- 21:51:01.877692 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:01.890267 tst gprs:sysmo: Using 1 x bts (candidates: 1) 21:51:02.019502 tst ping.py: using LAC 36453 21:51:02.138138 tst ping.py: using RAC 243 21:51:02.256804 tst ping.py: using CellId 36453 21:51:02.376128 tst ping.py: using BVCI 36454 21:51:02.399161 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.409775 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.420313 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.430899 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.441990 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.453702 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.466008 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 21:51:02.476760 tst gprs:sysmo: Using 1 x modem (candidates: 4) 21:51:02.755305 tst ping.py:19: start network... 21:51:02.879772 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:51:03.349433 run create_hlr_db(pid=4192): Launched 21:51:03.521363 bus /gobi_6: Setting Powered False 21:51:04.543320 run create_hlr_db(pid=4192): Terminated: ok {rc=0} 21:51:04.940361 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4194): Launched 21:51:05.238527 run osmo-hlr_10.42.42.2(pid=4195): Launched 21:51:05.345321 run osmo-stp_10.42.42.5: Starting osmo-stp 21:51:05.859690 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4197): Launched 21:51:06.157325 run osmo-stp_10.42.42.5(pid=4198): Launched 21:51:06.266267 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:51:06.781479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4200): Launched 21:51:06.886789 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:51:07.145495 run patchelf(pid=4201): Launched 21:51:07.319162 run osmo-stp_10.42.42.5(pid=4198): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4198)] 21:51:07.446641 run osmo-stp_10.42.42.5(pid=4198): stdout: | (launched: 2022-12-13_21:51:06.009972) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:51:07.573956 run osmo-stp_10.42.42.5(pid=4198): stderr: | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215106182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:51:07.696858 run osmo-stp_10.42.42.5(pid=4198): stdout: | (launched: 2022-12-13_21:51:06.009972) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:51:07.818996 run osmo-stp_10.42.42.5(pid=4198): stderr: | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213215106182 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213215106182 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213215106183 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:51:07.960566 run patchelf(pid=4201): Terminating (SIGINT) 21:51:08.126751 run patchelf(pid=4201): Terminated: ok {rc=0} 21:51:08.156802 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=4198): Process ended prematurely: osmo-stp_10.42.42.5(pid=4198) [trial-2395↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4198)] [trial-2395↪gprs:sysmo↪ping.py:22] 21:51:08.165451 tst ping.py:22: Test FAILED (6.3 sec) 21:51:08.225642 run osmo-hlr_10.42.42.2(pid=4195): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4195)] 21:51:08.274878 run osmo-hlr_10.42.42.2(pid=4195): stdout: | (launched: 2022-12-13_21:51:05.091357) 21:51:08.324601 run osmo-hlr_10.42.42.2(pid=4195): stderr: | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213215105268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213215105322 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213215105332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213215105332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213215105332 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:51:08.366895 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4194): Terminating (SIGTERM) 21:51:08.406984 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4197): Terminating (SIGTERM) 21:51:08.446947 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4200): Terminating (SIGTERM) 21:51:08.456131 --- ParallelTerminationStrategy: PID 4194 died... 21:51:08.510036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4194): Terminated: ok {rc=0} 21:51:08.519578 --- ParallelTerminationStrategy: PID 4197 died... 21:51:08.573037 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4197): Terminated: ok {rc=0} 21:51:08.582562 --- ParallelTerminationStrategy: PID 4200 died... 21:51:08.636211 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4200): Terminated: ok {rc=0} 21:51:08.724569 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4198): Process ended prematurely: osmo-stp_10.42.42.5(pid=4198) [trial-2395↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4198)]