Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=6670): Process ended prematurely: osmo-stp_10.42.42.5(pid=6670) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6670)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 22:11:01.748165 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:01.765619 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 22:11:01.935707 tst iperf3.py: using LAC 36559 22:11:02.063164 tst iperf3.py: using RAC 94 22:11:02.190451 tst iperf3.py: using CellId 36559 22:11:02.323288 tst iperf3.py: using BVCI 36560 22:11:02.348433 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.360254 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.371851 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.383408 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.395280 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.407335 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.419327 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.431430 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 22:11:02.443612 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 22:11:02.742582 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:11:02.879879 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:11:03.219299 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6662): Launched 22:11:03.500565 run iperf3-srv_10.42.42.10(pid=6663): Launched 22:11:03.701546 tst iperf3.py:8: start network... 22:11:03.838895 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:11:04.354152 run create_hlr_db(pid=6664): Launched 22:11:04.543695 bus /gobi_6: Setting Powered False 22:11:05.564596 run create_hlr_db(pid=6664): Terminated: ok {rc=0} 22:11:06.000137 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6666): Launched 22:11:06.327056 run osmo-hlr_10.42.42.2(pid=6667): Launched 22:11:06.449871 run osmo-stp_10.42.42.5: Starting osmo-stp 22:11:07.017518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6669): Launched 22:11:07.345518 run osmo-stp_10.42.42.5(pid=6670): Launched 22:11:07.465483 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:11:08.036173 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6672): Launched 22:11:08.153376 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:11:08.438581 run patchelf(pid=6673): Launched 22:11:08.630011 run osmo-stp_10.42.42.5(pid=6670): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6670)] 22:11:08.769899 run osmo-stp_10.42.42.5(pid=6670): stdout: | (launched: 2022-12-13_22:11:07.183433) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:08.909832 run osmo-stp_10.42.42.5(pid=6670): stderr: | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221107376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:09.045469 run osmo-stp_10.42.42.5(pid=6670): stdout: | (launched: 2022-12-13_22:11:07.183433) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:11:09.179810 run osmo-stp_10.42.42.5(pid=6670): stderr: | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213221107375 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213221107376 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213221107376 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:11:09.336010 run patchelf(pid=6673): Terminating (SIGINT) 22:11:09.519735 run patchelf(pid=6673): Terminated: ok {rc=0} 22:11:09.553437 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=6670): Process ended prematurely: osmo-stp_10.42.42.5(pid=6670) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6670)] [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 22:11:09.563425 tst iperf3.py:8: Test FAILED (7.9 sec) 22:11:09.626776 run osmo-hlr_10.42.42.2(pid=6667): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6667)] 22:11:09.678292 run osmo-hlr_10.42.42.2(pid=6667): stdout: | (launched: 2022-12-13_22:11:06.166415) 22:11:09.730320 run osmo-hlr_10.42.42.2(pid=6667): stderr: | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213221106366 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213221106379 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213221106387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213221106387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213221106387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:11:09.774790 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6662): Terminating (SIGTERM) 22:11:09.816883 run iperf3-srv_10.42.42.10(pid=6663): Terminating (SIGTERM) 22:11:09.858680 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6666): Terminating (SIGTERM) 22:11:09.900287 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6669): Terminating (SIGTERM) 22:11:09.942577 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6672): Terminating (SIGTERM) 22:11:09.952183 --- ParallelTerminationStrategy: PID 6662 died... 22:11:10.008270 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6662): Terminated: ok {rc=0} 22:11:10.018254 --- ParallelTerminationStrategy: PID 6663 died... 22:11:10.073857 run iperf3-srv_10.42.42.10(pid=6663): Terminated {rc=256} 22:11:10.083760 --- ParallelTerminationStrategy: PID 6666 died... 22:11:10.139557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6666): Terminated: ok {rc=0} 22:11:10.149841 --- ParallelTerminationStrategy: PID 6669 died... 22:11:10.205602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6669): Terminated: ok {rc=0} 22:11:10.215549 --- ParallelTerminationStrategy: PID 6672 died... 22:11:10.271943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6672): Terminated: ok {rc=0} 22:11:10.359220 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6670): Process ended prematurely: osmo-stp_10.42.42.5(pid=6670) [trial-2395↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6670)]