Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8680): Process ended prematurely: osmo-stp_10.42.42.5(pid=8680) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8680)]
Standard Output
---------------------------------------------- trial-2395 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 22:35:59.158455 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.169866 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:35:59.328373 tst iperf3.py: using LAC 36692 22:35:59.446129 tst iperf3.py: using RAC 227 22:35:59.563443 tst iperf3.py: using CellId 36692 22:35:59.682373 tst iperf3.py: using BVCI 36693 22:35:59.705380 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.716127 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.726711 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.737273 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.747731 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.758320 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.769492 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.780268 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:35:59.791141 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:36:00.065612 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:36:00.190754 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:36:00.503302 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8672): Launched 22:36:00.762200 run iperf3-srv_10.42.42.10(pid=8673): Launched 22:36:00.980225 tst iperf3.py:8: start network... 22:36:01.119942 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:36:01.691814 run create_hlr_db(pid=8674): Launched 22:36:01.868152 bus /gobi_6: Setting Powered False 22:36:02.888490 run create_hlr_db(pid=8674): Terminated: ok {rc=0} 22:36:03.290822 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8676): Launched 22:36:03.591003 run osmo-hlr_10.42.42.2(pid=8677): Launched 22:36:03.708465 run osmo-stp_10.42.42.5: Starting osmo-stp 22:36:04.240204 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8679): Launched 22:36:04.539791 run osmo-stp_10.42.42.5(pid=8680): Launched 22:36:04.648823 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:36:05.173294 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8682): Launched 22:36:05.280338 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:36:05.543047 run patchelf(pid=8683): Launched 22:36:05.720577 run osmo-stp_10.42.42.5(pid=8680): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8680)] 22:36:05.848913 run osmo-stp_10.42.42.5(pid=8680): stdout: | (launched: 2022-12-13_22:36:04.392759) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:36:05.978213 run osmo-stp_10.42.42.5(pid=8680): stderr: | �[0;m�[38;5;43m20221213223604565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223604565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223604566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223604566 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223604566 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223604566 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223604567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:36:06.102846 run osmo-stp_10.42.42.5(pid=8680): stdout: | (launched: 2022-12-13_22:36:04.392759) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:36:06.226260 run osmo-stp_10.42.42.5(pid=8680): stderr: | �[0;m�[38;5;43m20221213223604565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213223604565 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213223604566 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213223604566 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213223604566 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213223604566 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213223604567 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:36:06.369853 run patchelf(pid=8683): Terminating (SIGINT) 22:36:06.538174 run patchelf(pid=8683): Terminated: ok {rc=0} 22:36:06.569186 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=8680): Process ended prematurely: osmo-stp_10.42.42.5(pid=8680) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8680)] [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 22:36:06.578199 tst iperf3.py:8: Test FAILED (7.5 sec) 22:36:06.638234 run osmo-hlr_10.42.42.2(pid=8677): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8677)] 22:36:06.686902 run osmo-hlr_10.42.42.2(pid=8677): stdout: | (launched: 2022-12-13_22:36:03.443809) 22:36:06.736159 run osmo-hlr_10.42.42.2(pid=8677): stderr: | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213223603623 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213223603637 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213223603647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213223603647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213223603647 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:36:06.778228 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8672): Terminating (SIGTERM) 22:36:06.817719 run iperf3-srv_10.42.42.10(pid=8673): Terminating (SIGTERM) 22:36:06.857289 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8676): Terminating (SIGTERM) 22:36:06.896971 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8679): Terminating (SIGTERM) 22:36:06.936237 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8682): Terminating (SIGTERM) 22:36:06.945616 --- ParallelTerminationStrategy: PID 8672 died... 22:36:06.998599 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8672): Terminated: ok {rc=0} 22:36:07.008195 --- ParallelTerminationStrategy: PID 8673 died... 22:36:07.060687 run iperf3-srv_10.42.42.10(pid=8673): Terminated {rc=256} 22:36:07.070209 --- ParallelTerminationStrategy: PID 8676 died... 22:36:07.122973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8676): Terminated: ok {rc=0} 22:36:07.132747 --- ParallelTerminationStrategy: PID 8679 died... 22:36:07.185773 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8679): Terminated: ok {rc=0} 22:36:07.195465 --- ParallelTerminationStrategy: PID 8682 died... 22:36:07.248298 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8682): Terminated: ok {rc=0} 22:36:07.331627 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8680): Process ended prematurely: osmo-stp_10.42.42.5(pid=8680) [trial-2395↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8680)]