Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)

Failing for the past 257 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=7216): Process ended prematurely: osmo-stp_10.42.42.5(pid=7216) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7216)]

Standard Output

----------------------------------------------
trial-2395 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo iperf3.py
----------------------------------------------
22:18:54.340572 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.352201 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1)
22:18:54.511034 tst                        iperf3.py: using LAC 36601
22:18:54.631710 tst                        iperf3.py: using RAC 136
22:18:54.751731 tst                        iperf3.py: using CellId 36601
22:18:54.869783 tst                        iperf3.py: using BVCI 36602
22:18:54.892769 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.903763 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.914551 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.925299 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.936044 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.946869 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.958085 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.968644 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9)
22:18:54.979545 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4)
22:18:55.275563 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
22:18:55.410661 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
22:18:55.744638 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7208): Launched
22:18:56.022415 run iperf3-srv_10.42.42.10(pid=7209): Launched
22:18:56.220750 tst                      iperf3.py:8: start network...
22:18:56.356356 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
22:18:56.865246 run          create_hlr_db(pid=7210): Launched
22:18:57.051335 bus                          /gobi_6: Setting Powered False
22:18:58.073176 run          create_hlr_db(pid=7210): Terminated: ok {rc=0}
22:18:58.500899 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7212): Launched
22:18:58.823609 run    osmo-hlr_10.42.42.2(pid=7213): Launched
22:18:58.944704 run              osmo-stp_10.42.42.5: Starting osmo-stp
22:18:59.504097 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7215): Launched
22:18:59.827608 run    osmo-stp_10.42.42.5(pid=7216): Launched
22:18:59.945519 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
22:19:00.508582 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7218): Launched
22:19:00.624204 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
22:19:00.930388 run               patchelf(pid=7219): Launched
22:19:01.132103 run    osmo-stp_10.42.42.5(pid=7216): ERR: Terminated: ERROR {rc=1}  [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7216)]
22:19:01.265225 run    osmo-stp_10.42.42.5(pid=7216): stdout: 
| (launched: 2022-12-13_22:18:59.669135)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:19:01.400487 run    osmo-stp_10.42.42.5(pid=7216): stderr: 
| �[0;m�[38;5;43m20221213221859858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213221859858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213221859859 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213221859859 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213221859859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213221859860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213221859860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:19:01.531056 run    osmo-stp_10.42.42.5(pid=7216): stdout: 
| (launched: 2022-12-13_22:18:59.669135)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
22:19:01.663876 run    osmo-stp_10.42.42.5(pid=7216): stderr: 
| �[0;m�[38;5;43m20221213221859858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221213221859858 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221213221859859 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221213221859859 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221213221859859 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221213221859860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221213221859860 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
22:19:01.813771 run               patchelf(pid=7219): Terminating (SIGINT)
22:19:01.992713 run               patchelf(pid=7219): Terminated: ok {rc=0}
22:19:02.025340 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=7216): Process ended prematurely: osmo-stp_10.42.42.5(pid=7216) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7216)]  [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8]
22:19:02.035240 tst                      iperf3.py:8: Test FAILED (7.7 sec)
22:19:02.097665 run    osmo-hlr_10.42.42.2(pid=7213): ERR: Terminated: ERROR {rc=237}  [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7213)]
22:19:02.147658 run    osmo-hlr_10.42.42.2(pid=7213): stdout: 
| (launched: 2022-12-13_22:18:58.665330) 
22:19:02.198075 run    osmo-hlr_10.42.42.2(pid=7213): stderr: 
| �[0;m�[1;31m20221213221858860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221213221858860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221213221858860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221213221858860 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221213221858861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221213221858861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221213221858877 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221213221858885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221213221858885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221213221858885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
22:19:02.240358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7208): Terminating (SIGTERM)
22:19:02.280348 run iperf3-srv_10.42.42.10(pid=7209): Terminating (SIGTERM)
22:19:02.320006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7212): Terminating (SIGTERM)
22:19:02.359519 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7215): Terminating (SIGTERM)
22:19:02.399154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7218): Terminating (SIGTERM)
22:19:02.408310 ---      ParallelTerminationStrategy: PID 7208 died...
22:19:02.461367 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7208): Terminated: ok {rc=0}
22:19:02.471167 ---      ParallelTerminationStrategy: PID 7209 died...
22:19:02.523839 run iperf3-srv_10.42.42.10(pid=7209): Terminated {rc=256}
22:19:02.533421 ---      ParallelTerminationStrategy: PID 7212 died...
22:19:02.585986 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7212): Terminated: ok {rc=0}
22:19:02.595425 ---      ParallelTerminationStrategy: PID 7215 died...
22:19:02.648068 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7215): Terminated: ok {rc=0}
22:19:02.657613 ---      ParallelTerminationStrategy: PID 7218 died...
22:19:02.710102 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7218): Terminated: ok {rc=0}
22:19:02.797598 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7216): Process ended prematurely: osmo-stp_10.42.42.5(pid=7216) [trial-2395↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7216)]