Failed
gprs:oc2g+mod-bts0-dynts-ipa.ping.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5154): Process ended prematurely: osmo-stp_10.42.42.5(pid=5154) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5154)]
Standard Output
---------------------------------------------- trial-2395 gprs:oc2g+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 22:00:53.909742 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:53.922146 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:54.072269 tst ping.py: using LAC 36505 22:00:54.190876 tst ping.py: using RAC 40 22:00:54.306776 tst ping.py: using CellId 36505 22:00:54.422813 tst ping.py: using BVCI 36506 22:00:54.445439 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.456168 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.466763 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.477323 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.488081 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.499111 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.510268 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:54.521181 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:54.792497 tst ping.py:19: start network... 22:00:54.915256 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:55.389596 run create_hlr_db(pid=5148): Launched 22:00:55.559751 bus /gobi_6: Setting Powered False 22:00:56.582205 run create_hlr_db(pid=5148): Terminated: ok {rc=0} 22:00:57.003246 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5150): Launched 22:00:57.320083 run osmo-hlr_10.42.42.2(pid=5151): Launched 22:00:57.440182 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:57.991602 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5153): Launched 22:00:58.309062 run osmo-stp_10.42.42.5(pid=5154): Launched 22:00:58.424237 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:58.977301 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5156): Launched 22:00:59.090418 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:59.366908 run patchelf(pid=5157): Launched 22:00:59.551932 run osmo-stp_10.42.42.5(pid=5154): ERR: Terminated: ERROR {rc=1} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5154)] 22:00:59.687856 run osmo-stp_10.42.42.5(pid=5154): stdout: | (launched: 2022-12-13_22:00:58.152495) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:59.823429 run osmo-stp_10.42.42.5(pid=5154): stderr: | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220058344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:59.954609 run osmo-stp_10.42.42.5(pid=5154): stdout: | (launched: 2022-12-13_22:00:58.152495) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:00.084723 run osmo-stp_10.42.42.5(pid=5154): stderr: | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213220058343 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213220058344 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213220058346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:00.236167 run patchelf(pid=5157): Terminating (SIGINT) 22:01:00.413387 run patchelf(pid=5157): Terminated: ok {rc=0} 22:01:00.445627 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=5154): Process ended prematurely: osmo-stp_10.42.42.5(pid=5154) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5154)] [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22] 22:01:00.454839 tst ping.py:22: Test FAILED (6.5 sec) 22:01:00.517841 run osmo-hlr_10.42.42.2(pid=5151): ERR: Terminated: ERROR {rc=237} [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5151)] 22:01:00.569242 run osmo-hlr_10.42.42.2(pid=5151): stdout: | (launched: 2022-12-13_22:00:57.164444) 22:01:00.621349 run osmo-hlr_10.42.42.2(pid=5151): stderr: | �[0;m�[1;31m20221213220057361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213220057361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213220057361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213220057361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213220057361 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213220057362 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213220057374 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2395/run.2022-12-13_21-44-31/gprs:oc2g+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213220057383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213220057383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213220057383 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:00.665857 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5150): Terminating (SIGTERM) 22:01:00.707720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5153): Terminating (SIGTERM) 22:01:00.750329 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5156): Terminating (SIGTERM) 22:01:00.759913 --- ParallelTerminationStrategy: PID 5150 died... 22:01:00.816530 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5150): Terminated: ok {rc=0} 22:01:00.826542 --- ParallelTerminationStrategy: PID 5153 died... 22:01:00.900748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5153): Terminated: ok {rc=0} 22:01:00.915291 --- ParallelTerminationStrategy: PID 5156 died... 22:01:00.976397 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5156): Terminated: ok {rc=0} 22:01:01.062064 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5154): Process ended prematurely: osmo-stp_10.42.42.5(pid=5154) [trial-2395↪gprs:oc2g+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5154)]