Failed
gprs:nanobts+band-900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18344): Process ended prematurely: osmo-stp_10.42.42.5(pid=18344) [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18344)]
Standard Output
---------------------------------------------- trial-2396 gprs:nanobts+band-900+mod-bts0-egprs iperf3.py ---------------------------------------------- 00:22:08.655078 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:08.666961 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:22:08.817188 tst iperf3.py: using LAC 37256 00:22:08.942718 tst iperf3.py: using RAC 26 00:22:09.067250 tst iperf3.py: using CellId 37256 00:22:09.191493 tst iperf3.py: using BVCI 37257 00:22:09.216008 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.227483 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.238847 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.250048 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.261853 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.273280 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.284769 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.296169 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:22:09.307807 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:22:09.590804 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:22:09.716550 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:22:10.029075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18336): Launched 00:22:10.289921 run iperf3-srv_10.42.42.10(pid=18337): Launched 00:22:10.475091 tst iperf3.py:8: start network... 00:22:10.601289 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:22:11.084402 run create_hlr_db(pid=18338): Launched 00:22:11.257527 bus /gobi_6: Setting Powered False 00:22:12.280907 run create_hlr_db(pid=18338): Terminated: ok {rc=0} 00:22:12.709163 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18340): Launched 00:22:13.031341 run osmo-hlr_10.42.42.2(pid=18341): Launched 00:22:13.151004 run osmo-stp_10.42.42.5: Starting osmo-stp 00:22:13.711357 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18343): Launched 00:22:14.032710 run osmo-stp_10.42.42.5(pid=18344): Launched 00:22:14.149969 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:22:14.712015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18346): Launched 00:22:14.827199 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:22:15.107912 run patchelf(pid=18347): Launched 00:22:15.296295 run osmo-stp_10.42.42.5(pid=18344): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18344)] 00:22:15.434502 run osmo-stp_10.42.42.5(pid=18344): stdout: | (launched: 2022-12-14_00:22:13.874847) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:15.572892 run osmo-stp_10.42.42.5(pid=18344): stderr: | �[0;m�[38;5;43m20221214002214066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002214067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002214067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002214067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:15.706309 run osmo-stp_10.42.42.5(pid=18344): stdout: | (launched: 2022-12-14_00:22:13.874847) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:22:15.853712 run osmo-stp_10.42.42.5(pid=18344): stderr: | �[0;m�[38;5;43m20221214002214066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214002214067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214002214067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214002214067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214002214068 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:22:16.025474 run patchelf(pid=18347): Terminating (SIGINT) 00:22:16.210125 run patchelf(pid=18347): Terminated: ok {rc=0} 00:22:16.244318 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18344): Process ended prematurely: osmo-stp_10.42.42.5(pid=18344) [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18344)] [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8] 00:22:16.255253 tst iperf3.py:8: Test FAILED (7.6 sec) 00:22:16.321336 run osmo-hlr_10.42.42.2(pid=18341): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18341)] 00:22:16.375616 run osmo-hlr_10.42.42.2(pid=18341): stdout: | (launched: 2022-12-14_00:22:12.873245) 00:22:16.430256 run osmo-hlr_10.42.42.2(pid=18341): stderr: | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214002213074 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214002213086 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:nanobts+band-900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214002213095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214002213095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214002213095 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:22:16.476854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18336): Terminating (SIGTERM) 00:22:16.522575 run iperf3-srv_10.42.42.10(pid=18337): Terminating (SIGTERM) 00:22:16.568364 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18340): Terminating (SIGTERM) 00:22:16.614563 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18343): Terminating (SIGTERM) 00:22:16.658726 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18346): Terminating (SIGTERM) 00:22:16.669062 --- ParallelTerminationStrategy: PID 18336 died... 00:22:16.727883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18336): Terminated: ok {rc=0} 00:22:16.739641 --- ParallelTerminationStrategy: PID 18337 died... 00:22:16.797603 run iperf3-srv_10.42.42.10(pid=18337): Terminated {rc=256} 00:22:16.808759 --- ParallelTerminationStrategy: PID 18340 died... 00:22:16.867421 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18340): Terminated: ok {rc=0} 00:22:16.878511 --- ParallelTerminationStrategy: PID 18343 died... 00:22:16.937022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18343): Terminated: ok {rc=0} 00:22:16.948077 --- ParallelTerminationStrategy: PID 18346 died... 00:22:17.006698 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18346): Terminated: ok {rc=0} 00:22:17.097265 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18344): Process ended prematurely: osmo-stp_10.42.42.5(pid=18344) [trial-2396↪gprs:nanobts+band-900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18344)]