Failed
gprs:sysmo.ping.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12198): Process ended prematurely: osmo-stp_10.42.42.5(pid=12198) [trial-2396↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12198)]
Standard Output
---------------------------------------------- trial-2396 gprs:sysmo ping.py ---------------------------------------------- 23:18:23.671528 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:23.683519 tst gprs:sysmo: Using 1 x bts (candidates: 1) 23:18:23.819701 tst ping.py: using LAC 36914 23:18:23.947395 tst ping.py: using RAC 194 23:18:24.073629 tst ping.py: using CellId 36914 23:18:24.200887 tst ping.py: using BVCI 36915 23:18:24.226022 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.237228 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.248267 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.259296 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.270694 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.282086 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.293516 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 23:18:24.304888 tst gprs:sysmo: Using 1 x modem (candidates: 4) 23:18:24.602655 tst ping.py:19: start network... 23:18:24.739387 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:18:25.255518 run create_hlr_db(pid=12192): Launched 23:18:25.445638 bus /gobi_6: Setting Powered False 23:18:26.466630 run create_hlr_db(pid=12192): Terminated: ok {rc=0} 23:18:26.901979 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12194): Launched 23:18:27.230998 run osmo-hlr_10.42.42.2(pid=12195): Launched 23:18:27.351956 run osmo-stp_10.42.42.5: Starting osmo-stp 23:18:27.920319 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12197): Launched 23:18:28.247737 run osmo-stp_10.42.42.5(pid=12198): Launched 23:18:28.366368 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:18:28.932767 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12200): Launched 23:18:29.040485 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:18:29.306941 run patchelf(pid=12201): Launched 23:18:29.484589 run osmo-stp_10.42.42.5(pid=12198): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12198)] 23:18:29.614452 run osmo-stp_10.42.42.5(pid=12198): stdout: | (launched: 2022-12-13_23:18:28.085716) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:29.744175 run osmo-stp_10.42.42.5(pid=12198): stderr: | �[0;m�[38;5;43m20221213231828280 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231828281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231828281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231828281 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231828283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231828284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231828284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:29.870315 run osmo-stp_10.42.42.5(pid=12198): stdout: | (launched: 2022-12-13_23:18:28.085716) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:18:29.995094 run osmo-stp_10.42.42.5(pid=12198): stderr: | �[0;m�[38;5;43m20221213231828280 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213231828281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213231828281 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213231828281 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213231828283 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213231828284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213231828284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:18:30.139638 run patchelf(pid=12201): Terminating (SIGINT) 23:18:30.309274 run patchelf(pid=12201): Terminated: ok {rc=0} 23:18:30.340002 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12198): Process ended prematurely: osmo-stp_10.42.42.5(pid=12198) [trial-2396↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12198)] [trial-2396↪gprs:sysmo↪ping.py:22] 23:18:30.348486 tst ping.py:22: Test FAILED (6.7 sec) 23:18:30.408980 run osmo-hlr_10.42.42.2(pid=12195): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:sysmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12195)] 23:18:30.458111 run osmo-hlr_10.42.42.2(pid=12195): stdout: | (launched: 2022-12-13_23:18:27.068066) 23:18:30.507960 run osmo-hlr_10.42.42.2(pid=12195): stderr: | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213231827268 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213231827282 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:sysmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213231827290 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213231827291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213231827291 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:18:30.550508 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12194): Terminating (SIGTERM) 23:18:30.590800 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12197): Terminating (SIGTERM) 23:18:30.630837 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12200): Terminating (SIGTERM) 23:18:30.640159 --- ParallelTerminationStrategy: PID 12194 died... 23:18:30.693767 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12194): Terminated: ok {rc=0} 23:18:30.703428 --- ParallelTerminationStrategy: PID 12197 died... 23:18:30.756730 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12197): Terminated: ok {rc=0} 23:18:30.766344 --- ParallelTerminationStrategy: PID 12200 died... 23:18:30.819520 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12200): Terminated: ok {rc=0} 23:18:30.932891 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12198): Process ended prematurely: osmo-stp_10.42.42.5(pid=12198) [trial-2396↪gprs:sysmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12198)]