Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=16198): Process ended prematurely: osmo-stp_10.42.42.5(pid=16198) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16198)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 00:03:00.318313 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.329918 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:03:00.487265 tst iperf3.py: using LAC 37153 00:03:00.606690 tst iperf3.py: using RAC 178 00:03:00.725615 tst iperf3.py: using CellId 37153 00:03:00.849108 tst iperf3.py: using BVCI 37154 00:03:00.877467 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.890453 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.904680 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.926742 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.939259 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.951278 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.963103 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.975681 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:00.988653 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:03:01.296642 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:03:01.479283 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:03:01.813467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16190): Launched 00:03:02.094204 run iperf3-srv_10.42.42.10(pid=16191): Launched 00:03:02.279762 tst iperf3.py:8: start network... 00:03:02.405835 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:03:02.884141 run create_hlr_db(pid=16192): Launched 00:03:03.056166 bus /gobi_6: Setting Powered False 00:03:04.077895 run create_hlr_db(pid=16192): Terminated: ok {rc=0} 00:03:04.501118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16194): Launched 00:03:04.820669 run osmo-hlr_10.42.42.2(pid=16195): Launched 00:03:04.940547 run osmo-stp_10.42.42.5: Starting osmo-stp 00:03:05.495510 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16197): Launched 00:03:05.813594 run osmo-stp_10.42.42.5(pid=16198): Launched 00:03:05.928767 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:03:06.489392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16200): Launched 00:03:06.603124 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:03:06.880753 run patchelf(pid=16201): Launched 00:03:07.067234 run osmo-stp_10.42.42.5(pid=16198): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16198)] 00:03:07.203971 run osmo-stp_10.42.42.5(pid=16198): stdout: | (launched: 2022-12-14_00:03:05.657876) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:03:07.341186 run osmo-stp_10.42.42.5(pid=16198): stderr: | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000305852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:03:07.473055 run osmo-stp_10.42.42.5(pid=16198): stdout: | (launched: 2022-12-14_00:03:05.657876) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:03:07.604283 run osmo-stp_10.42.42.5(pid=16198): stderr: | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214000305852 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214000305852 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214000305853 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:03:07.756701 run patchelf(pid=16201): Terminating (SIGINT) 00:03:07.935619 run patchelf(pid=16201): Terminated: ok {rc=0} 00:03:07.968214 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=16198): Process ended prematurely: osmo-stp_10.42.42.5(pid=16198) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16198)] [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 00:03:07.978000 tst iperf3.py:8: Test FAILED (7.7 sec) 00:03:08.041025 run osmo-hlr_10.42.42.2(pid=16195): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16195)] 00:03:08.092302 run osmo-hlr_10.42.42.2(pid=16195): stdout: | (launched: 2022-12-14_00:03:04.663577) 00:03:08.144263 run osmo-hlr_10.42.42.2(pid=16195): stderr: | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214000304862 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214000304874 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214000304884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214000304885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214000304885 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:03:08.188681 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16190): Terminating (SIGTERM) 00:03:08.230601 run iperf3-srv_10.42.42.10(pid=16191): Terminating (SIGTERM) 00:03:08.272330 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16194): Terminating (SIGTERM) 00:03:08.314150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16197): Terminating (SIGTERM) 00:03:08.356278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16200): Terminating (SIGTERM) 00:03:08.366108 --- ParallelTerminationStrategy: PID 16190 died... 00:03:08.422628 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16190): Terminated: ok {rc=0} 00:03:08.432745 --- ParallelTerminationStrategy: PID 16191 died... 00:03:08.488814 run iperf3-srv_10.42.42.10(pid=16191): Terminated {rc=256} 00:03:08.498878 --- ParallelTerminationStrategy: PID 16194 died... 00:03:08.555107 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16194): Terminated: ok {rc=0} 00:03:08.565285 --- ParallelTerminationStrategy: PID 16197 died... 00:03:08.621165 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16197): Terminated: ok {rc=0} 00:03:08.631278 --- ParallelTerminationStrategy: PID 16200 died... 00:03:08.687076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16200): Terminated: ok {rc=0} 00:03:08.772858 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16198): Process ended prematurely: osmo-stp_10.42.42.5(pid=16198) [trial-2396↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16198)]