Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12408): Process ended prematurely: osmo-stp_10.42.42.5(pid=12408) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12408)]
Standard Output
---------------------------------------------- trial-2396 gprs:sysmo+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 23:21:25.026484 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.038302 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:21:25.182124 tst ping.py: using LAC 36929 23:21:25.300802 tst ping.py: using RAC 209 23:21:25.428603 tst ping.py: using CellId 36929 23:21:25.558965 tst ping.py: using BVCI 36930 23:21:25.584589 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.596330 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.607798 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.619280 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.630820 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.642373 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.654220 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:21:25.665811 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:21:25.946061 tst ping.py:19: start network... 23:21:26.072532 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:21:26.562744 run create_hlr_db(pid=12402): Launched 23:21:26.738436 bus /gobi_6: Setting Powered False 23:21:27.760785 run create_hlr_db(pid=12402): Terminated: ok {rc=0} 23:21:28.196924 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12404): Launched 23:21:28.525305 run osmo-hlr_10.42.42.2(pid=12405): Launched 23:21:28.649282 run osmo-stp_10.42.42.5: Starting osmo-stp 23:21:29.221939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12407): Launched 23:21:29.550777 run osmo-stp_10.42.42.5(pid=12408): Launched 23:21:29.670373 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:21:30.243076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12410): Launched 23:21:30.360185 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:21:30.647508 run patchelf(pid=12411): Launched 23:21:30.853614 run osmo-stp_10.42.42.5(pid=12408): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12408)] 23:21:30.988927 run osmo-stp_10.42.42.5(pid=12408): stdout: | (launched: 2022-12-13_23:21:29.388848) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:31.123811 run osmo-stp_10.42.42.5(pid=12408): stderr: | �[0;m�[38;5;43m20221213232129586 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232129587 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232129587 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232129587 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:31.253813 run osmo-stp_10.42.42.5(pid=12408): stdout: | (launched: 2022-12-13_23:21:29.388848) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:21:31.383919 run osmo-stp_10.42.42.5(pid=12408): stderr: | �[0;m�[38;5;43m20221213232129586 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232129587 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232129587 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232129587 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232129588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:21:31.534213 run patchelf(pid=12411): Terminating (SIGINT) 23:21:31.710363 run patchelf(pid=12411): Terminated: ok {rc=0} 23:21:31.744037 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=12408): Process ended prematurely: osmo-stp_10.42.42.5(pid=12408) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12408)] [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22] 23:21:31.753331 tst ping.py:22: Test FAILED (6.7 sec) 23:21:31.815344 run osmo-hlr_10.42.42.2(pid=12405): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12405)] 23:21:31.866266 run osmo-hlr_10.42.42.2(pid=12405): stdout: | (launched: 2022-12-13_23:21:28.362668) 23:21:31.919196 run osmo-hlr_10.42.42.2(pid=12405): stderr: | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213232128562 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213232128575 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:sysmo+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213232128583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213232128583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213232128583 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:21:31.963057 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12404): Terminating (SIGTERM) 23:21:32.006911 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12407): Terminating (SIGTERM) 23:21:32.051024 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12410): Terminating (SIGTERM) 23:21:32.061331 --- ParallelTerminationStrategy: PID 12404 died... 23:21:32.119500 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12404): Terminated: ok {rc=0} 23:21:32.130001 --- ParallelTerminationStrategy: PID 12407 died... 23:21:32.186245 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12407): Terminated: ok {rc=0} 23:21:32.196790 --- ParallelTerminationStrategy: PID 12410 died... 23:21:32.251784 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12410): Terminated: ok {rc=0} 23:21:32.339550 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12408): Process ended prematurely: osmo-stp_10.42.42.5(pid=12408) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12408)]